HDMI Extender over Cat5e/Cat6 Cable up to 60 Meters This HDMI extender allows for the extension of HDMI video signals up to 60 meters (196 feet) using two Cat5e or Cat6 cables. HDMI 1.3 signal up to 1080p at 40 meters or less and 1080i at 60 meters or less. Uses Cat5e/Cat6 cables for easy installation Useful where in-wall plenum wiring is required No external power necessary Specifications: Resolution: 1080p/1080i/720p/ 576p/480p/576i/48 0i Video color format: Deep color 36 bit Audio format: LPCM/Dolby- AC3/DTS7.1/DSD Data Transfer Speed: 102Gbps Input video signal: 5.0V P-P Maximum HDMI Output Cable Length: 15m (49 feet) Note: The extender also requires two Cat5e or Cat6 cables and two HDMI cables to make the connection. Several options are available above for purchase. If... Less

Extends up to 330 meters (1,000ft). This ultimate A/V extender kit sends audio, video, serial & IR control using a single CAT5e cable! It supports both stereo & digital audio, RS-232 half-duplex, bi-directional IR pass-thru and provides adjustable equalization and gain control. Includes power adaptors. (Local Connectors: 1 RJ45/RS-232, 2 HD15/RCA/3.5mm audio/3.5mm IR Female; Remote Connectors: 1 HD15/RJ45/RS- 232/3.5mm audio, 2 3.5mm IR Female)

What if you have a HDMI-capable display on one side of the room and you need to connect it to a 1080p media source on the other side of the room or even in another room? The Arkview HDMI-EXTC is the solution. With 2 separate units the HDMI-EXTC will let you extend HD video/audio signals by up to 100 feet using two Cat5e or Cat6 cables providing an inexpensive way to transmitting HDMI signals while still being able to retain the same HDMI quality that you would expect with a directly connected display. There's no need for software installation or configuration so setup is completely Plug-n-Play. It fully supports 1080p data loads and is HDMI 1.3b compliant. The 2.25Gbps max transfer rate eliminates one possible bottleneck that can ruin a good picture. A cost-effective solution for... Less

Cat Network cables are the perfect combination of value and performance. CAT Network Cable is an ideal solution tethering a long distances. USB cable is not recommended over 15 feet without an active USB extender. Signal loss and noise could occur otherwise. Daisy chaining multiple active USB extenders is a solution but can get expensive and is limited to 79ft total. CAT Network cable can extend up to 150 feet without interference, signal loss ornoise. Although a little slower than traditional USB it makes for a good inexpensive solution when tethering long distances. Used in conjunction with USB CAT Extender over network cable. All cables are made of 24AWG pure copper and gold plated contacts. Available in black, up to 150 feet.

Audio Extender, Connection Cat5, Color Black, Installation Method Plug And Play, Cable Type Cat5, Features Audio Extender Over Cat5, Ports 1, Package Quantity 1 Pair

The NextGen Single Cat-6 to HDMI Splitter extends and distributes high resolution video signals over a single Cat-6 cable allowing longer, more cost-effective Custom runs than is possible over withHDMI cable. Save time and money while offering unprecedented ability to distribute high quality HDMI performance for up to eight displays.

This HDMI Extender by CAT5 x1 uses one piece of CAT5e/6 cable to extend the HDTV display up to 50 meters for 1080p. It not only breaks the limitation of the HDMI cable transmission length,but also has more flexibility and convenience in cable construction. It is equipped with HDMI (high definition multimedia interface) connector and is capable of supporting DVI (digital visual interface) equipment when used with an HDMI to DVI Adapter, providing greater flexibility and options when integrating several home theater components. This product offers solutions for residential consumers: HDTV retail and show site, HDTV, STUB, DVD and Projector factories, noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate... Less

Audio Video Wall Plate, Connection Female Hdmi 1.3 To 2(pair) Cat5e/6, Color White, 165mhz, Installation Method Wall Mount, Features Hdmi 1.3, Dvi 1.0, Hdcp 1.1, Ports 1, Size 114.5mm X 70mm X 29.5mm, Package Quantity 1

Six-Zone High Definition Video Switching Transcode composite and S-Video and output them seamlessly via Component video or CAT-5 connectors Six Component Video outputs Nine shared composite S-Video and Component Video inputs Nine buffered component video outputs Six dedicated component video inputs - one for each zone Six CAT-5 Video outputs (RJ-45) RS-232 Control RS-232 Pass-through for an external RS-232 device Back panel IR input Ethernet connection Color bar video pattern test generator Flash software updates Daisy chain HD6s to create up to a 127-Zone system of High Definition video

HDMI Extender Using Cat5e or CAT6 Cable - Extend Upto 98ft Use this simple and effective HDMI® extender to send High Speed (1080p) HDMI® signals up to 30 meters (98 feet) over Cat5e/6 cable! Most extenders are small boxes, which must be mounted and which require additional cables to use. While they can usually handle longer distances, if you don't need to take the signal more than 30 meters, this simple pair of extender adapters is the right solution. Each adapter plugs into your HDMI® ports, with the sender in the source device and the receiver at the display. Then just run a pair of Cat5e/Cat6 cables between the adapters and you're in business! You won't need to provide external power - it gets the power it needs from the HDMI® source device. The adapters support up to 1080p resolutions... Less

HDMI DVI 1.3 Version 30 AWG 28 AWG 26 AWG 24 AWG 22 AWG 1.4 Version 30 AWG 28 AWG 26 AWG Micro HDMI Mini HDMI Flat HDMI HDMI to DVI HDMI Extensions Converters Switchers Splitters VIDEO 3-RCA Component 5-RCA Component S-VIDEO S-VIDEO S-VIDEO 2-RCA DVI Male to Male Male to Female COMPOSITE RCA 1-RCA 3-RCA VGA VGA VGA + 3.5mm BNC BNC to BNC BNC to RCA F-TYPE SIAMESE RG59+2DC RG6 Wooden Spool RG6 Standard Shield RG6 18 AWG AUDIO Speaker Wires 12 AWG 14 AWG 16 AWG 18 AWG Optical Cable RCA Audio 3.5m

The KanexPro 1x4 HDMI splitter is a one transmitter and four receivers set amplifier that, enables HDMI or DVI signals to be routed over distances up to 100ft.(30m) significantly beyond the capability of standard HDMI and DVI cables. When connected together using four economical and installer friendly CAT5e/6 cables, the transmitter inputs the HDMI signal into four identical outputs carrying 100ft./1080p resolution simultaneously from the provided receivers.

HDMI DVI 1.3 Version 30 AWG 28 AWG 26 AWG 24 AWG 22 AWG 1.4 Version 30 AWG 28 AWG 26 AWG Micro HDMI Mini HDMI Flat HDMI HDMI to DVI HDMI Extensions Converters Switchers Splitters VIDEO 3-RCA Component 5-RCA Component S-VIDEO S-VIDEO S-VIDEO 2-RCA DVI Male to Male Male to Female COMPOSITE RCA 1-RCA 3-RCA VGA VGA VGA + 3.5mm BNC BNC to BNC BNC to RCA F-TYPE SIAMESE RG59+2DC RG6 Wooden Spool RG6 Standard Shield RG6 18 AWG AUDIO Speaker Wires 12 AWG 14 AWG 16 AWG 18 AWG Optical Cable RCA Audio 3.5m

This Fosmon HDMI Extender Adapter allows the use of one piece of CAT5e/CAST6 cable to extend the HDTV display up to 50m (150ft) for 1080p. It not only breaks the limitation of the HDMI cable trasmission length but also has more flexibility and convenience in cable construction. Includes 1x Extender Sender; 1x Extender Receiver; 1x Power Adapter Signal Inputs/Output Input Video Signal: 0.5 -1.0 volts p-p Video format supported : DTV/HDTV 480i/576i/480p/57 6p/720p/1080i/108 0P Transmission distance: CAT-6 cable 50M for1080p Operating Frequency Video Amplifier Bandwidth: 1.65Gpbs/165MHz Vertical Frequency Range: 50/60Hz Resolutions (HDTV) Interlaced (50&60Hz): 480i 576i 1080i Progressive (50&60Hz): 480p 576p 720p 1080p Mechanical Size (L-W-H): 100×65×25.5MM Weight (Net):385G ... Less