13 SEER 2.5 TON NITROGEN CHARGED R22 CONDENSING UNIT This 13 seer/2.5 ton condensing unit is an ideal replacement for an older R22 system. It comes pre-charged with nitrogen and will need to be recharged with R22 refrigerant. This unit will ship via truckline, so please make sure to provide a reliable contact phone number for us. Below are some specs and a stock photo of this condensing unit. If you need line set you can find refrigeration tubing for this system here. Heavy Duty permanently lubricated motor Complete metal wrap protect coils from damage Galvanized steel cabinet with a polyurethane finish 2-1/2" pedestal base with weep holes to protect coils and allow water to drain 2.5 ton 208/230 volts 3/8" Liquid - 3/4" Suction 22 1/2"W x 22 3/4"D x 27"H - 180 lbs

SquareTrade © AP6.0 GARRISON FULL CASED EVAPORATOR COILS MULTI-POSITION UPFLOW/DOWNFLOW/H ORIZONTAL R22 This is a great 4 ton evaporated coils unit from Garrison, and will ship via truckline, so please make sure to provide a reliable contact phone number for us. Below are some specs and a stock photo of this unit. Limited Quantity Available. Factory installed thermal expansion valve (TXV) Includes horizontally drain pan 4 ton 3/8" Liquid - 7/8" Suction 22 1/2"W x 20 3/4"D x 26"H ALL EQUIPMENT S

SquareTrade © AP6.0 13 SEER 1.5 TON NITROGEN CHARGED R22 CONDENSING UNIT This 13 seer/1.5 ton condensing unit is an ideal replacement for an older R22 system. It comes pre-charged with nitrogen and will need to be recharged with R22 refrigerant. This unit will ship via truckline, so please make sure to provide a reliable contact phone number for us. Below are some specs and a stock photo of this condensing unit. If you need line set you can find refrigeration tubing for this system here . Heav

Ac Compressor, R-22, Nominal Hp 2 1/4, 32,000 Btuh, Voltage 208/230, 60 Hz, 1 Phase, 16.7 Rla Amps, Line Connection Suction Id 3/4 In, Line Connection Discharge Id 1/2 In, Base Mount Length 7 1/2 In, Base Mount Width 7 1/2 In, Height 16 3/8 In, Width 6 1/2 In, Length 6 1/2 In, Requires Run And Start Capacitors, High Temp Application, Includes Mounting Kit With Grommets And Sleeves

Compatible notebook models:IBM : Thinkpad A20, A21, A21e-2628, A21e-2632, A22, i1800-2628, i1800-2632 SeriesThinkPad T40, T41, T42, T43, R50 SeriesThinkPad 240 SeriesThinkPad 310, 315 SeriesThinkPad 355, 360 SeriesThinkPad 365 SeriesThinkPad 370, 750, 755 SeriesThinkPad 380, 385 SeriesThinkPad 390 Series / ThinkPad i1700, i1720, i1721, i1750 SeriesThinkpad 560, 755 SeriesThinkPad 600, 660 SeriesThinkPad 301, 700, 720 SeriesThinkPad 755, 760, 765, 790 SeriesThinkPad 770 SeriesIBM ThinkPad X40?X41 SeriesThinkPad T20, T21, T22, T23 Series LaptopThinkPad X20, X21, X22, X23 Series LaptopThinkPad X30 2672 / X30, X31 Series LaptopThinkpad R, R30, R31 Series LaptopThinkpad A30, A31 Series LaptopThinkPad T40, T41, T42, T43, R50 Series (Standard) LaptopThinkPad R40e Series LaptopThinkPad R32, R40... Less

Quiet condenser fan system Copper tube/aluminum fin coil Liquid refrigerant return protection Factory- installed bi-flow liquid line filter dryer Low-pressure switch Time-initiated, temperature- terminated defrost control Service valves with sweat connections and easy-access gauge ports 13 SEER performance with flowrater expansion device Contactor with lug connection Ground lug connection ARI Certified ETL Listed Cabinet Features Louver design sound control top Steel louver coil guard Heavy-gauge, galvanized-steel cabinet with rustresistant screws Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval Single-panel access to controls with space provided for field-installed accessories When properly anchored, meets the 2001 Florida Building Code unit integrity... Less

GOODMAN 2.0 Ton 13 Seer Central AC Condenser Unit Nitrogen Charged R22 Ready This is the perfect solution for replacing an old condenser that was charged with R22. This Goodman R22 ready ac condenser comes pre-charged with nitrogen and helium that will need to be evacuated before charging system with R22 refrigerant (not provided). You will need to replace the nitrogen and helium with R22 refrigerant to make this work. Below are some specs of this unit. Please feel free to ask us any questions

Quiet condenser fan system For use with R-22 refrigerant; charged with inert gas for shipping Factory- installed liquid line filter dryer Copper tube/aluminum fin coil Brass liquid and suction service valves with sweat connections Contactor with lug connections Ground lug connection ARI Certified; ETL, DOE Listed Cabinet Features Quiet operation with Louver design sound control top Steel louver coil guard Heavy-gauge galvanized-steel cabinet Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval Specifications Cooling Capacity: 1.5 Ton Cooling Capacity (btu): 18,000 Btu Efficiency: 13 Seer Compressor Type: Reciprocal Voltage: 208/230, 60Hz, 1 Phrase Max Breaker Size: 15 Amps Min/Max Volts: 197/253 Refrigerant Type: R22 *

Ac Compressor, R-22, Nominal Hp 3 1/2, 42,000 Btuh, Voltage 208/230, 60 Hz, 1 Phase, 17.3 Rla Amps, Line Connection Suction Id 3/4 In, Line Connection Discharge Id 1/2 In, Base Mount Length 9 1/2 In, Base Mount Width 9 1/2 In, Height 16 3/8 In, Width 6 1/2 In, Length 6 1/2 In, Requires Run And Start Capacitors, High Temp Application, Includes Mounting Kit With Grommets And Sleeves

Construction: Terminal Screws: #10-32 BrassCord Grip Assembly: Impact Modified NylonTerminal Cover: Clear PolycarbonateFace Terminal Assembly: Impact Modified NylonCover housing: Super Tough NylonConnector Contacts: High Performance Copper AlloyTerminal Clamp Nut: Zinc-Plated SteelAssembly Screws: Zinc-Plated SteelTechnical Specs: Dielectric Voltage: Withstands 3500V per UL498Maximum working Voltage: 600V AC or 250V DCCurrent Interupting: Certified for current interrupting at full rated currentTemperatur e rise: Maximum 30 deg C temperature rise at full rated current after 50 cycles of overload at 150% rated current for either AC or DC applications per UL498Terminal Identification: (X, Y Z Brass Hot) (G, Green, Grounding) (W, Silver, Neutral)Cord Accomodation: Round portable service... Less

Quiet condenser fan system For use with R-22 refrigerant; charged with inert gas for shipping Factory- installed liquid line filter dryer Copper tube/aluminum fin coil Brass liquid and suction service valves with sweat connections Contactor with lug connections Ground lug connection ARI Certified; ETL, DOE Listed Cabinet Features Quiet operation sound control top design Steel louver coil guard Heavy-gauge galvanized-steel cabinet Attractive Architectural Gray powder-paint finish with 500-hour salt-spray approval Specifications Cooling Capacity: 4.0 Ton Cooling Capacity (btu): 48,000 Btu Efficiency: 13 Seer Compressor Type: Scroll Voltage: 208/230. 60 Hz., 1 Phase Max Breaker Size: 40 Amps Min/Max Volts: 197/253 Refrigerant Type: R22 *

Cisco Catalyst 4500 AC Cord, Central Europe, CAB-AC-2800W-EU Continental European Cord for use with PWR-C45-1300ACV, PWR-C45-1400AC, PWR-C45-2800ACV and possibly other power supplies. Approvals: VDE, KEMA, CEBEC, NEMKO, DEMKO, SETI, OVE, SEV Supply End - European Plug "Schuko" CEE 7/7 Equipment End - IEC-60320-C19 Continental Europe Wire Type- H05VVF3G1.5mm² 3 Rating- 15A/250V Length: 2.5 Meters (8.20 ft)

GOODMAN 2.5 Ton 13 Seer Heat Pump Unit Nitrogen Charged R22 Ready This is the perfect solution for replacing an old split system heat pump that was charged with R22. This Goodman R22 ready heat pump comes pre-charged with nitrogen and helium that will need to be evacuated before charging system with R22 refrigerant (not provided). You will need to replace the nitrogen and helium with R22 refrigerant to make this work. Below are some specs of this unit. Please feel free to ask us any questions b

Ac Compressor, R-22, Nominal Hp 3 1/2, 42,000 Btuh, Voltage 208/230, 60 Hz, 1 Phase, 17.3 Rla Amps, Line Connection Suction Id 3/4 In, Line Connection Discharge Id 1/2 In, Base Mount Length 7 1/2 In, Base Mount Width 7 1/2 In, Height 16 3/8 In, Width 6 1/2 In, Length 6 1/2 In, Requires Run And Start Capacitors, High Temp Application, Includes Mounting Kit With Grommets And Sleeves

GOODMAN 1.5 Ton 13 Seer Heat Pump Unit Nitrogen Charged R22 Ready This is the perfect solution for replacing an old split system heat pump that was charged with R22. This Goodman R22 ready heat pump comes pre-charged with nitrogen and helium that will need to be evacuated before charging system with R22 refrigerant (not provided). You will need to replace the nitrogen and helium with R22 refrigerant to make this work. Below are some specs of this unit. Please feel free to ask us any questions b

Ac Compressor, R-22, Nominal Hp 4, 47,000 Btuh, Voltage 208/230, 60 Hz, 1 Phase, 24.4 Rla Amps, Line Connection Suction Id 7/8 In, Line Connection Discharge Id 1/2 In, Base Mount Length 7 1/2 In, Base Mount Width 7 1/2 In, Height 17 3/8 In, Width 6 1/2 In, Length 6 1/2 In, Requires Run And Start Capacitors, High Temp Application, Includes Mounting Kit With Grommets And Sleeves

Your air conditioning unit works hard all summer, so give it a wintertime reward with this heavy-duty cover that keeps outdoor central air conditioners clean, dry and ready to use. Fabric has waterproof coating, is treated to resist cracking in cold weather and has elastic hem for a tight fit. It features a protective splash guard skirt and tough interlocked seams that add strength and durability. It also features padded handles for easy fitting and removal - no bungee cords or tiedowns - and air vents to reduce condensation and wind lofting. Fits square air conditioners up to 34in.L x 34in.W x 30in.H.

GARRISON 13 SEER 2.5 TON R410A CONDENSING UNIT This is a 13 seer/2.5 ton condensing unit. This system is from Garrison, and will ship via truckline, so please make sure to provide a reliable contact phone number for us. Below are some specs and a stock photo of this condensing unit. If you need line set you can find refrigeration tubing for this system here. Heavy Duty permanently lubricated motor Brass service valves are easily accessible Complete metal wrap protect coils from damage Removable top grille assembly provides ease of service Galvanized steel cabinet with a polyurethane finish Five minute restart delay timer on heat pumps 2-1/2" pedestal base with weep holes to protect coils and allow water to drain 2.5 ton 208/230 volts 38" Liquid - 3/4" Suction 22 1/2"W x 22 1/2"D x 34... Less

Compatible Parts Number for VGP- AC19V22: SN1910 PCGA- ACX1 PCGA- AC19V PCGA- AC19V1 PCGA- AC19V10 PCGA- AC19V11 PCGA- AC19V12 PCGA- AC19V14 PCGA-AC19V3 PCGA- AC19V4 VGP- AC19V10 VGP- AC19V11 VGP-AC19V12 VGP- AC19V13 VGP- AC19V14 VGP- AC19V15 VGP-AC19V19 VGP- AC19V21 VGP- AC19V22 VGP- AC19V23 VGP-AC19V24 VGP- AC19V25 VGP- AC19V26 VGP- AC19V27 VGP- AC19V30        Specifications for VGP-AC19V22: Color: Black Condition: New Weight: 13.1 oz Type: 6-Cell Li-ion Output... Less

AC Power Cord, L6-30P to L6-30R, 10 AWG, 10' Approvals: UL, CSA Supply End - NEMA L6-30P Equipment End - NEMA L6-30R Wire Type - 10 AWG 3 SJT Rating- 30A/250V Length- 10 feet

Ac Compressor, R-22, Nominal Hp 3 1/2, 42,000 Btuh, Voltage 208/230, 60 Hz, 3 Phase, 14.1 Rla Amps, Line Connection Suction Id 3/4 In, Line Connection Discharge Id 1/2 In, Base Mount Length 7 1/2 In, Base Mount Width 7 1/2 In, Height 16 3/8 In, Width 6 1/2 In, Length 6 1/2 In, High Temp Application, Includes Mounting Kit With Grommets And Sleeves

14K Portable Air Conditioner with Remote... Auto-evaporation Function: Allows continuous operation without inconvenience of Water Removal; multi- directional Airflow; dehumidify Function; easy install Kit included for double hung and casement/slider Windows; Bucketless Dual Hose System for Powerful and Efficient Cooling; Auto Evaporation Function: Allows Continuous Operation without Water removal; Adjustable Airflow; 24-Hour On/Off Timer; Electronic Controls with Full-Function remote; 3 Cooling and 3 Fan Speeds; Dehumidification Function; LCD Display Window; Exhaust Kit Included; 100 Pint Dehumidifier; Electrical (volts, amps, watts): 115V, 10.5A, 1200W; 18-7/8" W x 35-7/16" H x 15-23/32" D.

Ac Compressor, R-22, Nominal Hp 5, 60,000 Btuh, Voltage 380-400/460, 50/60 Hz, 3 Phase, 7.6 Rla Amps, Line Connection Suction Id 7/8 In, Line Connection Discharge Id 1/2 In, 7 1/2 Base Mount Length (in), 7 1/2 Base Mount Width (in), Height 17.7 In, Width 7 1/4 In, Length 7 1/4 In, Requires N\a, Potential Relay N\a, High Temp Application, Meets Ari Performance Standards, Includes Mounting Kit With Grommets And Sleeves

Luxaire (York) Model HABAW042S 3.5 Ton AC Condenser, 10 Seer, R22 (has R22 Charge). Unit is 3 phase 3/60/460V. Condenser is 35" Long x 23" wide x 25" Tall. Shipping weight on condenser 180# Items are new and unused in original box. Please Email us or call (952) 884-8266 (612-518-6683 after 5 central or on weekends)for a freight quote or with questions. I ship nationwide and to Canada. Minnesota residents will be charged sales tax.