i30 - To get professional quality results you need a professional quality iron. The i30 series irons are designed to provide quality dry steam, while being comfortable for the operator to use. Features and performance. The i30 irons incorporate a die-cast aluminum plate with 32 separate steam chambers, which eliminates condensation even when used with an extra long steam hose. What type of boiler will it work with? Hook it up to our i700 or i702 steam boilers, or with any ironing system that uses a solenoid steam release valve.

i30 - To get professional quality results you need a professional quality iron. The i30 series irons are designed to provide quality dry steam, while being comfortable for the operator to use. Features and performance. The i30 irons incorporate a die-cast aluminum plate with 32 separate steam chambers, which eliminates condensation even when used with an extra long steam hose. What type of boiler will it work with? Hook it up to our i700 or i702 steam boilers, or with any ironing system that uses a solenoid steam release valve.

i30 - To get professional quality results you need a professional quality iron. The i30 series irons are designed to provide quality dry steam, while being comfortable for the operator to use. Features and performance. The i30 irons incorporate a die-cast aluminum plate with 32 separate steam chambers, which eliminates condensation even when used with an extra long steam hose. What type of boiler will it work with? Hook it up to our i700 or i702 steam boilers, or with any ironing system that uses a solenoid steam release valve.

Yes Control Type Electronic Indicator Lights Days to Empty; Low Salt; Status Light Memory Backup Yes Permanent Settings Memory Yes Salt Storage Capacity 200.0 lb Style Sculpted System Monitor Yes Type Electronic- Demand Driven Efficiency (grains per lb.-salt) Clear Water Iron Reduction (ppm) Hardness Removal (gpg) 110 Plumbing Connection / Pipe Size In & Out (in.) up to 1-1/4 Regeneration Time (min.) 134-143

Reducing Bushing, Hazardous Location, Application Designed To Reduce Conduit Entries To A Smaller Size And For Use In Threaded Rigid And Imc Conduit Systems, Color Silver, Material Of Construction Malleable Iron, Conduit Size (in.) 5 To 3-1/2, Standards Ul 886, C22.2 No. 25 & C22.2 No. 30, Ul Listed For Class I, Groups C, D; Class Ii, Groups E, F, G; And Class Iii

This deluxe swivel ironing center from Iron-A-Way is fully assembled and ready to install. The spring activated swivel allowes it to move 90 degrees left and right. It has a premium hot iron storage, a spotlight, built-in safety switch, garment hook and additional storage shelf. There is a 60 minute solid state, silent timer, and a full length piano hinge on the right side. Ironing board cover and pad are included. Unfinished flush birch door. UL Listed. Overall dimensions of this unit are 55-1/8 inches H x 17-1/5 inches W x 9-5/8 inches D with a 42 inch ventilated board with 4 inch vertical adjustment. NE421AU

The electric CombBind C450E has all the convenience features you need to bind fast and easy. Exclusive ''Paper Centering System'' combined with vertical feed aligns paper for more accurate punching. ''Document Separator'' divides your stack of sheets into the right thickness for punching. One-touch electric punching is easy and productive. Rotary dial provides precise control of comb opening and closing. The binding machine punches up to 25 sheets of 20 lb. bond letter-size paper and binds up to 450 sheets. Maximum comb size is 2''.

LINK1478-5 Features: -Square wave TIG 175. -Delivers a low peak current and fast positive / negative transition time. -High frequency ARC starting is used for both AC and DC TIG welding modes. -Standard auto balance control automatically delivers optimal mix of cleaning action VS. penetration. -Excellent low amperage starting performance - down to 10 amps. -Outstanding general purpose AC/DC stick welding capability, you can tackle steel, stainless, cast iron. -Hardfacing applications, including AWS E6010 electrodes like Fleetweld 5P+. -Remotely controlling your current level is an added expense with other TIG welders in this class. -Includes a rugged series 17 torch with ultra-flex cable. -Torch is detachable for easy repair or to use optional torches for especially tight spaces or... Less

This deluxe electronic ironing center from HANDI-PRESS features a ventilated metal, swiveling ironing board that hides away in a metal cabinet with a birch door. The 42-inch board, electrical outlet, and hot iron storage all fit in the cabinet. Cabinet material: Metal Cabinet color: White Ironing board material: Metal Ironing board color: White Door material: Birch Door color: Natural wood Hardware: Silver plated full-lenght piano hinge Ventilated, adjustable, 180-degree swiveling, hideaway board Electrical outlet, hot iron storage Lighted on/off rocker switch, work light, auto disconnect switch UL and ULc listed Measurements: 48 inches long x 16 inches wide x 6.125 inches deep Assembly required: Fully assembled and ready to be installed

Mounting Body For Contender Series, 3-device, Hub Size 1/2 In., Hub Style Dead-end, Material Of Construction Malleable Iron, Height 8.34 In., Width 3.72 In., Depth 3.06 In., Standards Ul 894, Ul 1203, Ul Listed For Class I, Division 1, Groups C, D; Class I, Division 2, Groups B, C, D; Class Ii, Division 1 And 2, Groups E, F, G; And Class Iii, Includes Internal Ground Screw

Female Union, Hazardous Location, Application Used For Connecting Conduit To Conduit, Color Silver, Length (in.) 3.38, Material Of Construction Malleable Iron, Conduit Size (in.) 2-1/2, Standards Ul 886, C22.2 No. 25 & C22.2 No. 30, Ul Listed For Class I, Division 1 And 2, Groups B, C, D; Class Ii, Division 1 And 2, Groups E, F, G; And Class Iii

Reducing Bushing, Hazardous Location, Application Designed To Reduce Conduit Entries To A Smaller Size And For Use In Threaded Rigid And Imc Conduit Systems, Color Silver, Material Of Construction Malleable Iron, Conduit Size (in.) 5 To 4, Standards Ul 886, C22.2 No. 25 & C22.2 No. 30, Ul Listed For Class I, Groups C, D; Class Ii, Groups E, F, G; And Class Iii

Rugged 2-cylinder cast iron compressor with thermally protected 5 hp, 115V electric motor. Easy view oil site gauge, sturdy belt guard. Removable cylinders for easy maintenance. High efficiency reed valves for maximum performance and large plastic intake filters. Regulator and gauge included for convenient control of line pressure. SPECIFICATIONS: 5.6 HP, 115V, 5.6 CFM at 90 PSI/12.5 Amp draw at 90 PSI. 150 max PSI, 1,720 RPM, 95 to 125 pressure switch, 20 gallon air tank capacity, 150 PSIG rating , Single Phase, 12.5 amp draw. 120 lbs. tool weight. 35"Length x 15"Width x 28"Height.

This electric ironing center from Iron-A-Way comes fully assembled and ready to install. This unit features premium hot iron storage, an electrical system, built-in on/off rocker switch and safety switch, garment hook and additional storage shelf and a full length piano hinge on the right side. This unit includes an ironing board cover and pad. Unfinished flush birch door. UL Listed. Overall dimensions of this unit are 47-7/8 inches H x 17-1/10 inches W x 17-1/10" D with a 42 inch ventilated metal board. ESP421AU

Female Union, Hazardous Location, Application Used For Connecting Conduit To Conduit, Color Silver, Length (in.) 3.38, Material Of Construction Malleable Iron, Conduit Size (in.) 3, Standards Ul 886, C22.2 No. 25 & C22.2 No. 30, Ul Listed For Class I, Division 1 And 2, Groups B, C, D; Class Ii, Division 1 And 2, Groups E, F, G; And Class Iii

Reducing Bushing, Hazardous Location, Application Designed To Reduce Conduit Entries To A Smaller Size And For Use In Threaded Rigid And Imc Conduit Systems, Color Silver, Material Of Construction Malleable Iron, Conduit Size (in.) 6 To 5, Standards Ul 886, C22.2 No. 25 & C22.2 No. 30, Ul Listed For Class I, Groups C, D; Class Ii, Groups E, F, G; And Class Iii

Mounting Body For Eds Series, 2-gang, Hub Size 1/2, Number Of Gangs 2, Hub Style Dead-end, Material Of Construction Malleable Iron, Height 6.06 In., Width 7.44 In., Depth 5.31 In., Standards Ul 508, Ul 698, Ul 1203; C22.2 No. 14-m, C22.2 No. 25, C22.2 No. 30, Class I, Division 1, Groups C, D; Class I, Division 2, Groups B, C, D; Class Ii, Division 1 And 2, Groups E, F, G; And Class Iii, Includes Internal Ground Screw

Fits: General Electric Old Style Upright Premier U4/5/6/7 Vacuum models Kenmore vacuum using # 20-5270 belt and Singer SDB2 U41 models.

Lamp Specifications Spec Data Lamp Wattage (W) 1200 Cap/Base Sure Fit Cap Rod 15.5-6 Lumen Output (Lm) 110000 Efficacy Source (Lm/W) 92 Color Temp. (K) 5600 Burning Position Any CRI 80 Average Lamp Life (Hrs) 1000 Replace Before (Hrs) 1200 Min. Ignition Supply Voltage (V) 207 Lamp Current (A) 13.8

Female Union, Hazardous Location, Application Used For Connecting Conduit To Conduit, Color Silver, Length (in.) 3.5, Material Of Construction Malleable Iron, Conduit Size (in.) 4, Standards Ul 886, C22.2 No. 25 & C22.2 No. 30, Ul Listed For Class I, Division 1 And 2, Groups B, C, D; Class Ii, Division 1 And 2, Groups E, F, G; And Class Iii

Keep your clothes looking their best with this steam and spray iron from Continental Electric®.

Reducing Bushing, Hazardous Location, Application Designed To Reduce Conduit Entries To A Smaller Size And For Use In Threaded Rigid And Imc Conduit Systems, Color Silver, Material Of Construction Malleable Iron, Conduit Size (in.) 6 To 4, Standards Ul 886, C22.2 No. 25 & C22.2 No. 30, Ul Listed For Class I, Groups C, D; Class Ii, Groups E, F, G; And Class Iii

Mounting Body For Eds Series, 2-gang, Hub Size 3/4, Number Of Gangs 2, Hub Style Dead-end, Material Of Construction Malleable Iron, Height 6.06 In., Width 7.44 In., Depth 5.31 In., Standards Ul 508, Ul 698, Ul 1203; C22.2 No. 14-m, C22.2 No. 25, C22.2 No. 30, Class I, Division 1, Groups C, D; Class I, Division 2, Groups B, C, D; Class Ii, Division 1 And 2, Groups E, F, G; And Class Iii, Includes Internal Ground Screw

General Equipment EP8DC25 General's line of portable air blowers can accommodate most non-hazardous confined space ventilation requirements. Select from 8 inch and 12 inch diameter units with power choice of gasoline, 12 VDC or 115 VAC. Both radial and axial configurations available for the most demanding air flow applications. There are no plastic frame parts to crack. This BLOW-R-PAC Non-Hazardous Location Air Ventilation Blower with 8" x 25' Flexible Duct is constructed with heavy gauge aluminum and steel. All General blowers offer laboratory certified air flow rates with independent, third-party testing. Features: -Complete with 8 inch diameter x 25 foot flexible duct and integral storage canister -BLOW-R-PAC -Permanent magnet motor -50 ampere battery terminal connections -8 inch... Less

Electric Magnetic Lock 280KG 600lb Holding Force For Iron And Wooden Door Use Top Descriptions Electric Magnetic Lock 280KG Holding Force Fail-Safe NC Voltage: 12V DC (default) or 24V DC , Brand New!!! Description Are you still looking for a good electric magnetic lock to Upgrade your security ?Now,this lock can need your need perfect!It is a good-looking design electric magnetic lock which suit for any access control system . Funtion: NC Mode - (Locked while supplied with power)Fail Safe Mo

2" Discharge 3540 G.P.H' src="http://www. lewiscontractorsa les.com/Merchant2/ gra phics/00000002/ne wnav08.jpg" border=0> Non-Clog, Solids Handling Electric Submersible Pumps for Sludge, Sewage, Trash & Industrial Waste The 1/2HP pumps are used as portable pumps or for permanent installation. GENERAL DATA MAX. FLOW: GPM 59 MAX. HEAD: ft 22' PUMP TYPE 2" NPT-M CONSTRUCTION/MATE RIAL DATA MECHANICAL SEAL - UPPER Crb / Cer MECHANICAL SEAL - LOWER Sic / Sic MOTOR CASING 304 SS PUMP VOLUTE Cast Iron IMPELLER - MULTI VANE Cast Iron LIPSEAL & O-RINGS Buna - N ROTOR SHAFT 304 SS EXTERNAL HARDWARE

Mounting Body For Contender Series, 3-device, Hub Size 1 In., Hub Style Dead-end, Material Of Construction Malleable Iron, Height 8.34 In., Width 3.72 In., Depth 3.06 In., Standards Ul 894, Ul 1203, Ul Listed For Class I, Division 1, Groups C, D; Class I, Division 2, Groups B, C, D; Class Ii, Division 1 And 2, Groups E, F, G; And Class Iii, Includes Internal Ground Screw