Hvac Starter Tool Set, Number Of Pieces 70, Number Of Wrenches 19, Number Of Pliers 9, Number Of Screwdrivers 12, Number Of Striking Tools 6, Number Of Miscellaneous Tools 24, Wrenches Included 8" Adjustable W/grip, 10" Adjustable W/grip, 12" Pipe, Refrigeration Ratcheting Box 9/16" To 1/2" Hex, 3/8" To 5/16" Square, 12 Point Combination Sae- 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 And 7/8"

Hvac Add-on Tool Set, Sae, Number Of Pieces 35, Drive Size (in.) 3/8, Number Of Sockets/accs. 28, Number Of Wrenches 7, 3/8 In. Drive Sockets/accs. Included Magnetic Power Sae- 5/16, 3/8, 7/16, 1/2 And 9/16", 12 Point Deep Sae- 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 And 7/8", 12 Point Standard Sae- 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16 And 7/8", Extensions- 1 3/4, 3 And 6", Universal Joint, Classic Ratchet

CAT III 1000v / CAT IV 600v. Jaw Size - 1.57". Amps AC - 600. TRMS - yes. Volts AC - 1000. Volts DC - 1000. Ohms - 6 kOhms.

M12 Clamp-Gun HVAC Clamp (Tool Only) - 2238-20

FEATURES:105 Pieces. 3/8" Drive Tools. Designed for fastener sizes 3/8" - 7/8". Contains: 28 Sockets and Accessories 26 Wrenches 6 Striking and Struck Tools 9 Pliers 12 Screwdrivers 24 Miscellaneous Tools.

Hvac Motor, 3-phase, 1-1/2 Hp, Nameplate Rpm 1725, Voltage 200-230/460, Nema/iec Frame 56h, Open Dripproof, Cradle Mounting, Number Of Speeds 1, 60 Hz, Full Load Amps 5.3/5.6/2.8, Thermal Protection None, Insulation Class B, Service Factor 1.2, Ball Bearings, Ambient 40 C, Cw/ccw Rotation, Shaft Dia. 5/8 In., Shaft Length 1-15/16 In., Stud Pattern 4-1/8 X 4-1/8 In., Nominal Efficiency High, Continuous Duty

MPN #TIFVA500A. TIF ANALYZER DIGITAL HVAC. Most Air Conditioning Tools products are available for in-store pickup from Advance Auto Parts.

Pro Seal Mechanic/HVAC Recharging Tool Kit This kit includes: 4 CFM - 2 stage Vacuum pump Pittstop Heavy Duty Gauge Set Hi & Low Thread down coupler Digital thermometer Hi & Low Gauge Cushions Top Can Tap 134a to R12 adapter Double end brass valve core tool 32 oz. Premium Vacuum Pump Oil

Hvac Starter Tool Kit, Number Of Pieces 16, Includes 5 In. Pipe Crimper, Snap Lock Punch, Hand Notcher, Hand Seamer, Folding Tool, Divider, Left And Right Cut Aviation Snips, 14 In. Aluminum Pattern Snip, 7/32 In. Scratch Awl, Setting Hammer, Offset Duct Stretcher, Turboshear, Hole Cutter, (100 Ea.) Zip-ins And Bit-tips, And Soft-sided Tool Bag

Complete Tool Kit for Troubleshooting HVAC Systems Includes Two Meters for Making All Critical Voltage, Current and Temperature Measurements. Same as TK8100 except a large durable tool bag that is manufactured with heavy-duty nylon material many pockets. It is designed with an open top for ease of access and triple-bottom construction and sturdy handles. Includes: * 10" (H)x 9 1/2"(W)x 15 1/2"(L) Case # C180 * Autoranging Multimeter with temperature # M2625 * Clamp Meter # ST1010 * 8" Groove Pliers # ST95 * Nut Drivers 3/16",1/4",5/16" # ND3 * Diagonal Pliers # ST26 * Long Nose Pliers # ST34 * #1 philiips screwdriver # ST71 * #2 phillips screwdriver # ST71A * 3/16" slotted screwdriver # ST72 * 1/4" slotted screwdriver # ST72A * AC Line Splitter # ST74 * AC Voltage Detector Probe # ST73 *... Less

Pro-Flush is a flushing solvent for air conditioning and refrigeration systems, and is formulated for R-410A retrofits, refrigerant conversions and compressor burnouts. Pro-Flush is compatible with all refrigerants and compressor oils. Pro-Flush is the answer for technicians who need a professional quality flushing solvent as well as the components to match. All solvents in Pro-Flush are non-VOC and conform to EPA SNAP standards. Pro-Flush is not HAZMAT for storage and ground transportation.

Shaded Pole Motor, Open Air-over, 1/6 Hp, 1550 Rpm, 208-230 Volts, 3.2 Full Load Amps, 42y Nema Frame, 1.0 Service Factor, 50/60 Hz, Cradle Mounting, All-angle Sleeve Bearings, Auto Thermal Protection, Shaft Diameter 1/2 In, Shaft Length 2 7/8 In, Rotation Cwle, Ambient 40 C, Length Less Shaft 4 15/16 In, Insulation Class B, Body Diameter 5 In, Ring To Ring Center 4 9/16 In, Includes Bx Connector

CAT III 1000v / CAT IV 600v. Jaw Size - 1.57". Amps AC - 600. TRMS - yes. Volts AC - 1000. Volts DC - 1000. Ohms - 6 kOhms.

Hvac Motor, 3-phase, 1 Hp, Nameplate Rpm 1725, Voltage 200-230/460, Nema/iec Frame 56, Open Dripproof, Cradle/stud Mounting, Number Of Speeds 1, 60 Hz, Full Load Amps 3.4-3.6/1.8, Thermal Protection None, Insulation Class B, Service Factor 1.25, Ball Bearings, Ambient 40 C, Cw/ccw Rotation, Shaft Dia. 5/8 In., Shaft Length 1-15/16 In., Stud Pattern 4-1/8 X 4-1/8 In., Nominal Efficiency High, Continuous Duty

Hvac Multimeter Kit, Includes Model 116 True Rms Hvac Multimeter With Temperature And Microamp Measurement (1gaj1), Model 62 Infrared Thermometer (5ye68), Tl75 Hard Point Test Lead Set (1t341), Toolpak (tm) Magnetic Meter Hanging Strap (4xl48), C115 Deluxe Carrying Case With Shoulder Strap, Pipe Wrap Thermocouple, 80bk Integrated Temperature Probe (4yv55), 80ak Thermocouple Adapter (4pd16) And Instructions

Digital Multimeter, Voltage (ac) 1000, Voltage (dc) 1000, 10 Amps Ac, 10 Amps Dc, Resistance (ohms) 40m, Basic Dc Accuracy 0.3 Percent+2d, 6000 Counts, True Rms N, Auto Ranging Y, Safety Rating Cat Iv 600, Cat Iii 1000, Temp. Range -40 To 1832 Degrees F, Capacitance 0.00 - 60nf / 600nf / 6micronf / 60micronf / 600micronf / 60mf, Frequency Counter 10hz, 10mhz, Special Features 0 - 60mhz, Audible Continuity Y, Diode Test Y, Peak Hold Y, Backlit Lcd Display, Data Logging N, Interface N

Complete Tool Kit for Troubleshooting HVAC Systems Includes Two Meters for Making All Critical Voltage, Current and Temperature Measurements. Includes: * Heavy-Duty Black Canvas Zipper Case # C800 * Autoranging Multimeter with temperature # M2625 * Clamp Meter # ST1010 * 8" Groove Pliers # ST95 * Nut Drivers 3/16",1/4",5/16" # ND3 * Diagonal Pliers # ST26 * Long Nose Pliers # ST34 * #1 philiips screwdriver # ST71 * #2 phillips screwdriver # ST71A * 3/16" slotted screwdriver # ST72 * 1/4" slotted screwdriver # ST72A * AC Line Splitter # ST74 * AC Voltage Detector Probe # ST73 * Pocket Flashlight # ST32 * AC Receptacle Tester # ST38G

Hvac 3.3 In Diameter Motor, Permanent Split Capacitor, Open Air-over, 1/12 Hp, Nameplate Rpm 1400, Voltage 115/208-230, Nema/iec Frame Nonstandard, Service Factor 1.0, Full Load Amps 1.1/0.6-0.6, 60/50 Hz, Cw/ccw Rotation, Insulation Class B, Ambient 40 C, Number Of Speeds 1, Stud Mounting, Ball Bearings, Auto Thermal Protection, Shaft Dia 5/16 In, Shaft Length 3-1/8 In, Length Less Shaft 3 1/2 In, Mounting Pattern 2 X 2 In, Includes 4 Mfd 370 Vac Capacitor

Direct-drive Blower Motor, Split-phase, Totally Enclosed Air-over, 1/2-1/4 Hp, 1/4 Hp @ Lower Rpm, Nameplate Rpm 1725/1140, Voltage 115, Full Load Amps 8.2/5.3, 60 Hz, 1 Phase, Nema/iec Frame 56, Service Factor 1.0, Ambient 40 C, Insulation Class B, Number Of Speeds 2, Cradle/stud Mounting, Ball Bearings, Auto Thermal Protection, Rotation Cw/ccw, Body Dia 6 1/2 In, Length Less Shaft 9 13/16 In, Shaft Dia 5/8 In, Shaft Length 2 In

Direct-drive Blower Motor, Split-phase, Totally Enclosed Air-over, 1/6 Hp, Nameplate Rpm 1725, Voltage 115/208-230, Full Load Amps 2.8/1.4-1.4, 60 Hz, 1 Phase, Nema/iec Frame 48y, Service Factor 1.0, Ambient 40 C, Insulation Class B, Number Of Speeds 1, Cradle/stud Mounting, Ball Bearings, Thermal Protection None, Rotation Cw/ccw, Body Dia 5 9/16 In, Length Less Shaft 7 1/4 In, Shaft Dia 1/2 In, Shaft Length 1 9/16 In

You are bidding on a brand new USA 12F 12 inch Folding Tool. Folds 3/8" and 1". The 3/8" fold is ideal for drive cleats. The 1" fold is for panning, boots, Sheet metal Duct work, Duct caps and more. Both sides have sight holes for proper depth alignment. Metal capacity 24 gauge mild steel. Overall length is approx 12" Made of high quality steel. MADE IN USA Sheet metal hand bending tool.

Direct-drive Blower Motor, Split-phase, Totally Enclosed Air-over, 1/2-1/4 Hp, 1/4 Hp @ Lower Rpm, Nameplate Rpm 1725/1140, Voltage 115, Full Load Amps 8.2/5.3, 60 Hz, 1 Phase, Nema/iec Frame 56, Service Factor 1.0, Ambient 40 C, Insulation Class B, Number Of Speeds 2, Cradle/stud Mounting, Ball Bearings, Thermal Protection None, Rotation Cw/ccw, Body Dia 6 1/2 In, Length Less Shaft 9 13/16 In, Shaft Dia 5/8 In, Shaft Length 2 In

Direct-drive Blower Motor, Split Phase, Totally Enclosed Air-over, 1/2 Hp, Nameplate Rpm 1725, Voltage 115/208-230, Full Load Amps 6.8/3.1-3.4, 60 Hz, 1 Phase, Nema/iec Frame 56, Service Factor 1.30, Ambient 40 C, Insulation Class B, Number Of Speeds 1, Cradle/stud Mounting, Ball Bearings, Thermal Protection None, Rotation Cw/ccw, Body Dia 6 1/2 In, Length Less Shaft 8 13/16 In, Shaft Dia 5/8 In, Shaft Length 2 In

Shaded Pole Motor, Open Air-over, 1/6 Hp, 1550 Rpm, 115 Volts, 6.4 Full Load Amps, 42y Nema Frame, 1.0 Service Factor, 60 Hz, Cradle Mounting, All-angle Sleeve Bearings, Auto Thermal Protection, Shaft Diameter 1/2 In, Shaft Length 2 7/8 In, Rotation Cwle, Ambient 40 C, Length Less Shaft 4 15/16 In, Insulation Class B, Body Diameter 5 In, Ring To Ring Center 4 9/16 In, Includes Bx Connector

Shaded Pole Motor, Open Air-over, 1/10 Hp, 1550 Rpm, 230 Volts, 2.9 Full Load Amps, 42y Nema Frame, 1.0 Service Factor, 60 Hz, Cradle Mounting, All-angle Sleeve Bearings, Auto Thermal Protection, Shaft Diameter 1/2 In, Shaft Length 2 7/8 In, Rotation Cwle, Ambient 40 C, Length Less Shaft 4 15/16 In, Insulation Class B, Body Diameter 5 In, Ring To Ring Center 4 9/16 In, Includes Bx Connector

M Z O O M Z O O M Z O O M ClicPic Photos copyright © 2009 Jabetc AC manifold gauge set. Brand New! Complete diagnostic and service gauge set for use on air conditioning systems with R134 refrigerant. Color-coding on gauges, valves and hoses Manufacturer look and details may vary