Convert IDE (Standard Parallel IDE) to SATA interface and enable SATA hard disk to be installed with this converter cable May also convert SATA (Serial ATA) to IDE interface, enable the IDE hard disk to be installed Bidirectional IDE to SATA Converter Compliant with Serial ATA (SATA) Specification Supports ATA 100/133 Support Windows 98 / SE / ME/ 2000 / XP / Vista / WIN 7 / Mac® OS 8.6 and above Mini board size, no space wasted Connector: 1 x 40 pin IDE port 2 x 4 pin Serial ATA port 1 x 4 pin power port Includes: SATA to IDE / IDE to SATA Converter SATA Cable Power Cable Accessory ONLY.

Cables Unlimited USB 2.0 to IDE & SATA Adapter Cable with Power Turn any SATA or IDE drive into a convenient external drive with our USB 2.0 to IDE drive adapter. Simply connect an IDE drive, plug the USB to IDE adapter into an available USB port to transfer files from computers or notebooks, back up files, or store files on hard drives with ease. Supports Iomega Zip, CD-ROM, CD-RW, DVD-ROM and hard drives. Transfer files quickly and easily. Support SATA spread-spectrum transmitter Compliance with USB 2.0 (Hi-Speed) specification Support ATA/ATAPI LBA48 bit addressing mode Support dual LUN (Logic Unit Number) with automatic master/slave enumeration High-Speed Data Transfer, Low Power Consumption Small enough for travel Operating System Support: Desktop and Laptop computers with... Less

Connection cable between SATA devices and Mainboard/Control ler. This cable can be used to connect a SATA drive such as a HDD or DVD-drive to the Mainboard or SATA Controller. Please make sure that your drive is SATA and not IDE, as the cable is not compatible to IDE devices. The cable is elaborately shielded to make it perfect for use in a PC. One connector is straight, the other angled to allow easy connection. Technical details: Length: 50cm Color: Red Connectors: 2 x Straight Connection type: SATA II

Lindy IDE Converter for SATA Drives Plugs directly into a SATA drive 40 Way IDC Male (controller) to Serial ATA (drive) Power adapter cable included Supports SATA Generation 1 and 2 devices at speeds of 1.5 and 3GBps Fully compliant with SATA II 1.0 specification Supports HDD larger than 137GB Bridge converter supports PC, Mac and Linux Compatible with Ultra ATA 133/100/66/33 Plug & Play installation, no software required Dimensions: 75 x 26mm

The Image MASSter 4000PRO Open Tray is the next generation, fast and reliable, IT Duplicator based on the time proven ImageMASSter 4000IDE Series. The Image MASSter 4000PRO Open Tray comes as the perfect solution for the mid-size IT organization looking for all the benefits of an enterprise level hard drive duplicator in a compact and easy to use solution. This versatile unit supports the high speed duplication of up to eight (8) 2.5" and 3.5" SAS, SATA, IDE*, USB and e-SATA drives. Through the the use of an efficient, cable-free drive caddy system, users can change drives quickly minimizing the total time necessary for drive duplication or wiping processes. The unit operates at a top speed capability of 18GB/minute which easily handles the fastest drives available today and also allows... Less

USB TO IDE CABLE FOR 2.5"/3.5"/5.25" DRIVE WITH POWER ADAPTER This is a high-quality USB to IDE / SATA Drive Adapter which implements a bridge between one USB port and one ATA or ATAPI based mass storage device port. The USB to IDE / SATA Drive Adapter turns any IDE or SATA drive into a convenient external drive. Easily transfer files from computer or notebook, back up files, or store large file archives on hard drives. The Hi-Speed USB interface provides for easy installation with its Plug and Play design. The adapter supports all existing IDE/ATAPI devices such as CD-ROM, CD-RW, DVD-ROM, IDE hard drives and SATA hard drives. This adapter provides a standard 40-pin IDE connector for 3.5" and 5.25" drives on one side of the adapter, and a 44-pin connector for 2.5" laptop/notebook drives... Less

Connection cable between SATA devices and Mainboard/Control ler. This cable can be used to connect a SATA drive such as a HDD or DVD-drive to the Mainboard or SATA Controller. Please make sure that your drive is SATA and not IDE, as the cable is not compatible to IDE devices. The cable is elaborately shielded to make it perfect for use in a PC. One connector is straight, the other angled to allow easy connection. Technical details: Length: 60cm Color: Blue Connectors: 1 x Straight, 1 x Angled Connection type: SATA II

CABLES UNLIMITED - USB SATA CABLE USB 2.0 TO SATA IDE CABLE WITH POWER (USB-2110). NEW. IN STOCK.

Type: USB to IDE&SATASpecifica tions: Connector 1: USB Type A Male Connector 2: 40-pin IDC Female (for 3.5in and 5.25in drives) 44-pin IDC Female (for 2.5in drives) 7-pin SATA Female (for SATA drives) Fully compliant with USB 2.0 and USB 1.1 Up to 480 Mbps data transfer rate 30.75in cable length 33in overall lengthFeatures: Turn any IDE or SATA drive into a convenient external drive! Simply connect one IDE/ATAPI or SATA-based mass storage device through a USB port to easily transfer files from a computer or laptop backup files or store large file archives on an external hard drive. The USB 2.0 interface enables easy installation with its plug-and-play design. The adapter supports all existing IDE/ATAPI devices such as Iomega Zip CD-ROM CD-RW DVD-ROM and IDE hard drives. ... Less

The Image MASSter 4000PRO 3.5" is the next generation, fast and reliable, IT Duplicator based on the time proven ImageMASSter 4000IDE Series. The Image MASSter 4000PRO 3.5" comes as the perfect solution for the mid-size IT organization looking for all the benefits of an enterprise level hard drive duplicator in a compact and easy to use solution. This versatile unit supports the high speed duplication of up to eight (8) 2.5" SAS, SATA, IDE*, USB and e-SATA drives. Through the the use of an efficient, cable-free drive caddy system, users can change drives quickly minimizing the total time necessary for drive duplication or wiping processes. The unit operates at a top speed capability of 18GB/minute which easily handles the fastest drives available today and also allows the user to be... Less

Connection cable between SATA devices and Mainboard/Control ler. This cable can be used to connect a SATA drive such as a HDD or DVD-drive to the Mainboard or SATA Controller. Please make sure that your drive is SATA and not IDE, as the cable is not compatible to IDE devices. The cable is elaborately shielded to make it perfect for use in a PC.  Technical details: Length: 50cm Color: Black Connectors: 2 x Straight Connection type: SATA

This cable converts 2 internal SATA port on motherboard to the back PCI bracket of computer system to an eSATA connector (Support IDE Power) Specifications: Connectors: 2 x eSATA female, 2 x SATA male Cable: SATA cable  Length: 35cm Header Connection Guides Simply plug the SATA male connector into the SATA female connector on the motherboard. Note that the orientation of the connection is guided by the tongue and groove mechanism on the two connectors.

5X IDE to SATA 15 PIN(Standard) Adapter Standard IDE TO SATA power adapter Converts IDE to SATA for power, is used to Power Harddrives, CD/DVD drives.on pc/desktops, server or other. Converts standard ide to sata, which allows adaptation of older systems to newer ports.Length: 7.25 inches (exact)Quantity: 5 per order Shipping: First class mail 2-3 days/ Sellebrity Analytics

Connection cable between SATA devices and Mainboard/Control ler. This cable can be used to connect a SATA drive such as a HDD or DVD-drive to the Mainboard or SATA Controller. Please make sure that your drive is SATA and not IDE, as the cable is not compatible to IDE devices. The cable is elaborately shielded to make it perfect for use in a PC. One connector is straight, the other angled to allow easy connection. Technical details: Length: 60cm Color: Black Connectors: 1 x Straight, 1 x Angled Connection type: SATA II

Connection cable between SATA devices and Mainboard/Control ler. This cable can be used to connect a SATA drive such as a HDD or DVD-drive to the Mainboard or SATA Controller. Please make sure that your drive is SATA and not IDE, as the cable is not compatible to IDE devices. The cable is elaborately shielded to make it perfect for use in a PC. One connector is straight, the other angled to allow easy connection. Technical details: Length: 20/40/60cm Color: Sleeved Black (with Latch) Connectors: 1 x Straight, 1 x Angled Connection type: SATA

HOME SHIPPING SIGN UP CONTACT US VISIT OUR STORE Camera Cell phone Fashion Gadgets Games Home ACC MP3 Music PC Sports Product Description SATA 15 Pin Male to Female 4 Pin IDE Power Cable Cord Please note that we are selling factory direct products. All our products are 100% brand new in manufacturer's packaging. Specification: Product Name IDE to SATA Cable Type 4 Pin Female IDE to Dual 15 Pin Male SATA Material (External) Plastic Color Black, Red, Yellow, White Length (Each) 20cm/ 7.8 Weight 19g