Overview The JM20330 is a single chip solution for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 JM20330 supports a 1.5GHz data rate, and scalable to 3.0 GHz data rate by directly doubling the internal clock source. The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin. Feature Compliance Serial ATA 1.0 Specification compliant Overall ... Less

Two-Way IDE To SATA + SATA To IDE Converter Two-Way IDE To SATA + SATA To IDE Converter This is a bi-direction IDE an SATA converter for serial and parallel ATA translation. You may connect an IDE hard drive to your PC motherboard's SATA controller or vice versa with this Bi-Directional IDE to SATA Converter or SATA to IDE adapter! It's easy to install and there are no drivers needed. There is a mode switch for selecting this device to be used for either SATA to IDE or IDE to SATA conversion. This IDE/SATA adapter is featured with high speed 150 MB/s transfer rate, automatic SATA 3.0/1.5 Gbps speed negotiation, and support for 3.5-inch IDE hard drives as well as 5.25" optical drives . Jmicro JM20330 Chipset Plug & Play and Hot-swapping capability 150MB/s transfer rate Automatic SATA... Less

10 Pcs 4 Port SATA IDE VIA VT6421A PCI Card Adapter For PC HDD Hard Drive Caddy New IDE PCI SATA Serial ATA Card PC VIA VT6421A 6421 SKU:C06030080 (Use This SKU Number Searching at Our Ebay Shop.) Specifications Support 2 independent Serial ATA channels, allow connection to 2 Serial ATA hard disk drives.2 internal ports and 1 external port, with the external port being shared with one of the internal ports.1 IDE port Compliant with Serial ATA Specification Rev. 1.0 Compliant with PCI Specificati

Lindy IDE Converter for SATA Drives Plugs directly into a SATA drive 40 Way IDC Male (controller) to Serial ATA (drive) Power adapter cable included Supports SATA Generation 1 and 2 devices at speeds of 1.5 and 3GBps Fully compliant with SATA II 1.0 specification Supports HDD larger than 137GB Bridge converter supports PC, Mac and Linux Compatible with Ultra ATA 133/100/66/33 Plug & Play installation, no software required Dimensions: 75 x 26mm

Type: IDE to SATASpecification s: Connects up to two (2) SATA hard drives or optical drives into an IDE controller and eliminates the incompatibility between IDE and SATA devices in one easy step Uses dual Marvell bridge chipsets for best performance & compatibility Supports all SATA-I SATA-II and SATA-III devices; 2.5' 3.5' & 5.25' HDDs SSDs or ODDs Easily fits in any available IDE (ATA 40-pin) connector in cable free configuration (*no IDE cable required) Supports PIO Mode 0-4 Supports ATA Host Bridge Supports Serial ATA Power Save mode Plug-N-Play and Hot-swapping capability Operating System Requirements: 32-bit & 64-bit Windows 98SE/ME/2000/Serv er 2003/XP/Server 2003/Vista/Server 2008/Windows 7 Linux Mac OS X 10.2.x or abovePackage Contents: One (1) IDE to Dual SATA... Less

Providing Excellent Service Since 1989 STARTECH.COM ide to SATA drive mounted adapter New-Retail Description: The perfect solution for adding SATA drives to motherboards lacking available SATA connectivity, while preserving space within the computer. Also ideal for use with older motherboards that do not provide SATA data or power connectors. IDE2SAT is a pure hardware solution and requires no drivers or software and is easy to install. Features: 48 bit addressing supports larger capacity drives

NEW Startech.com IDE2SAT25 IDE 40 pin Female/SATA Adapter number: IDE2SAT25, UPC: 065030832779) Manufacturer: StarTech.com Manufacturer Part Number: IDE2SAT25 Brand Name: StarTech.com Product Model: IDE2SAT25 Product Name: 40 Pin Female IDE to SATA Adapter Converter This IDE to SATA adapter converts a 40-pin IDE connector to a SATA connector, allowing you to connect a 2.5in or 3.5in SATA (SATA, SATA II/SATA 300) drive to the motherboard in place of an IDE drive. The IDE to SATA Adapter is suitable for installation in any computer case, as it is requires minimal space and does not impact airflow. Product Type: Data Transfer Adapter Technical Information Connector on First End: 1 x 40-pin IDC Female Connector on First End: 1 x SP4 Male Connector on Second End: 1 x 7-pin Male SATA Physical... Less

IDE Controller to SATA Adapter - Use a SATA Drive on a IDE Controller! Use your IDE Controller to connect a SATA device! Featuring the Jmicron 20330 chipset, this device allows you to connect a SATA device to an IDE controller on your motherboard. It's compliant with ATA/ATAPI UDMA transfer up to UDMA 133 and supports SATA/150 drives. A jumper switch allows you to set this to master or slave depending on your needs. You can connect a SATA drive to any motherboard! This adapter is ideal for legacy boards but can also come in handy with newer motherboards. Buy a second adapter and you can set your SATA devices as master and slave on one IDE controller! General Features: Uses an IDE controller to connect SATA devices Jmicro 20330 chipset Serial ATA 1.0a specification compliant Supports... Less

NEW 2 IN 1 IDE TO SATA/SATA TO IDE CONVERTER ADAPTER Whatever you have IDE Hard Disk - SATA mother board or SATA Hard Disk - IDE mother board, this converter can convert both sides. 40pin IDE port X1 Serial ATA port X1 4 pin power connector X1 Mini board size, no space wasted Compliant with Serial ATA (SATA) Specification Converts Serial ATA to parallel ATA /Converts parallel ATA to Serial ATA Supports ATA100/133 compliant with Serial ATA specifcation Plug and play Suppor a HDD capacity up to 1TB Package include: 1x IDE to SATA / SATA to IDE Converter 1x SATA Cable 1x Power Cable

+ Add Shoplet to Favorite Sellers Startech.com - IDE2SAT25 - StarTech.com 40 Pin Female IDE to SATA Adapter Converter - Connector Adapters - 2V10745 This IDE to SATA adapter converts a 40-pin IDE connector to a SATA connector, allowing you to connect a 2.5in or 3.5in SATA (SATA, SATA II/SATA 300) drive to the motherboard in place of an IDE drive. The IDE to SATA Adapter is suitable for installation in any computer case, as it is requires minimal space and does not impact airflow. 1 x IDC Female

Type: SATA to IDESpecifications : SATA II 3Gbps Mini Adapter Board (size 75mm x 26mm)Features: Convert the High Capacity SATA II 3Gbps and SATA 1.5Gbps devices like Blu-ray Disc optical drive SSD Hard Drive and SATA Storage Device to work with IDE Host Controller Supports any type of SATA II 3Gbps and SATA I 1 5Gbps Device (Blu-ray Disc SSD DVD DVD-RAM CD-ROM CD-RW Hard Disk) Convert SATA Drive like a standard IDE/ATAPI Drive 48 bits LBA can Break Capacity-Limit to Support HDD larger than 137GB Compliant with Serial ATA 2.6 Support Jumper setting for IDE Master Slave and Cable Select Modes Tag Command Queuing (Max 32 entries) SATA Hot-plug SATA Power Save modes ATA/ATAPI PIO mode data transfer ATA/ATAPI UDMA data transfer rate of 150 133 100 66 44 33 ... Less

1 x IDE to SATA / SATA to IDE Converter 1 x SATA Cable 1 x Power Cable Description: * 40pin 2 IN 1 IDE TO SATA SATA TO IDE Converter Adapter * One 40pin IDE port * One Serial ATA port * One 4 pin power connector * Compliant with Serial ATA (SATA) Specification * Converts Serial ATA to parallel ATA /Converts parallel ATA to Serial ATA * Supports ATA100/133 * Compliant with Serial ATA specifcation Brand New Product.