No need to run AC power lines for your wireless access point, network camera or IP phone. Simply connect the PoE Injector to the LAN switch port, and use the existing Cat5 cabling to deliver DC power as well as transfer data. Preserve Existing Investments Does your existing LAN switch not support the new IEEE 802.3af PoE standard? Well, dont let that stop you from realizing the benefits of delivering DC power over the existing Cat5 Ethernet cabling. Use the Model 503389 PoE Injector until you are able to upgrade your LAN switch to a model that supports the IEEE 802.3af PoE standard. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that the products are protected from power problems. The PoE Injector was... Less

DETAILS: The SonicWALL PoE Injector adds 48VDC to the unused (non-data) wires in standard Category 5 Ethernet cable. As a result, the Power over LAN Hub delivers both data and power to the terminal.Device Type: Power injector - external Dimensions (WxDxH): 2.4 in x 5.7 in x 1.2 in Weight: 15.9 oz Input Voltage: AC 90-264 V Output Voltage: -48 V Power Provided: 15.4 Watt Output connector(s): 1 x RJ-45 MANUFACTURER: Sonicwall UPC: 758479055440 ALTERNATE ITEM #: 01-SSC-5544 Weight: 0.80 lb(s)Case

Generic 48VDC 1151 Style Power Supply The 1151 Series Power Supply provides power to Avaya IP telephones when PoE is not compatible or PoE is not available. Features Universal AC Input RJ45 type connectors accept D8W modular plug cables Input 100-240 V, 50-60 Hz, 500-250 mA Output +48 V, 417 mA Power LED Includes power cable and D8W line cord Compatibility Avaya 4606, 4612, 4624 Avaya 4601, 4602, 4602SW, 4610SW. 4620, 4620SW, 4621SW, 4622SW, 4625SW, 4630SW Avaya 5601, 5602, 5602SW, 5610SW, 5620SW, and 5621SW Avaya 9610, 9620L, 9620, 9620C, 9630, 9640, 9650, 9650C, 9670G Not compatible with 9608, 9611G, 9621G, 9630G, 9640G, or 9641G. For 9630G and 9640G please see Avaya 1151D1 power supply . For 9608, 9611G, 9621G, and 9641G please see Avaya SPPOE-1A PoE Injector . Not used to power EU24... Less

ETHERNET TO FIBER (2MM) 10/100 W/POE INJECTOR MEDIA CONVERTER

IEEE 802.3af Power over Ethernet standard is based on the new standard for POE system, which based on the IEEE 802.3 an increase of direct power supply cable through the relevant standards, is an extension of the existing Ethernet standards, is the first of a international standards for power distribution. This Power over Ethernet injector with one Ethernet input (data only) port and one output (data + power) port that is designed for small or medium network environments. This product can convert standard 100-240V/AC power into low voltage DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories. It also features PoE awareness to verify whether the network device receiving power is IEEE 802.3af compliant, or only the data will be sent through LAN... Less

Model# MS-POE-IJAF Part# 900002001G(US) Supported model# IP7130, IP7131, IP7138, IP7151, IP7153, IP7142, IP7160, IP7161, IP7251, IP7330, IP7361, IP8161, PZ7151, PZ7111/PZ7121, PZ7131, FD7130, FD7131, FD7132, FD7141, FD7160 Package dimension Length: 267  Width: 160  Height: 45 (mm) Efficiency 70 % Min Indicators AC Power: Red   Channel Powered: Green   Channel Alarm: Red Material ABS    Weight 150 g Power supply Input: AC 90 V ~ AC 264 V, 0.4A 110 V, 0.2A 220 V Output: DC 48 V, 350 mA Operating Temperature 0 ~ 60 °C Inner dimension Length: 85  Width: 76  Height: 33 (mm)

The POEINJ100 10/100 Mbps PoE Power over Ethernet Injector with 48V Output converts standard 90-260V/AC power into low-voltage DC power that can run over existing Cat5 (or better) network cable to power IEEE 802.3at compliant network accessories. The Power over Ethernet injector device also features PoE awareness, to verify whether the device receiving power is IEEE 802.3at compliant. If the device is not compliant, only data will be sent through the LAN cable, protecting your device from damage. By adding the POEINJ100 to your existing network setup, installing devices such as Wireless Access Points(WAPs) and IP cameras can be easily accomplished where electrical wall outlets may not be available, without the hassle or expense of running new electrical wiring. Backed by a StarTech.com... Less

This Power over Ethernet injector with one Ethernet input (data only) port and one output (data + power) port that is designed for small or medium network environments. This product can convert standard 100-240V/AC power into low voltage DC that runs over existing LAN cable to power up IEEE 802.3af/at compliant network accessories. It also features PoE awareness to verify whether the network device receiving power is IEEE 802.3af compliant, or only the data will be sent through LAN cable. By adding a PoE splitter to existing non-PoE networking equipment, installing networking products such as access points and IP cameras can easily be performed. Wireless device deployments are easily located without the need for power outlets and network administrators don't need to use AC power adapters... Less

UBIQUITI POE48 Power Over Ethernet Injector 48V PoE Power your Access Point or other Ethernet Device using your Internet Cable Eliminate the need to place an Ethernet-enabled device, such as a wireless access point, near a power outlet. This Power-over-Etherne t (PoE) device delivers both data and electrical power to Power-over-Etherne t-enabled devices using a single Ethernet cable. The POE-48 is an advanced Power Over Ethernet power supply / power inserter. The power supply is autoranging on the input (it accepts 90 to 260 VAC input power) and has a regulated voltage output. It has overload and short circuit protection in addition to Ethernet surge suppression built-in. The device is not a proprietary unit. The power is supplied on Ethernet pins 4 and 5 (V+) and 7 and 8 (V-). It comes... Less

Description: SKU:NET029 POE 48V 1A Input Voltage: AC 100-240V Output Voltage: DC48V Output Current: 1000MA Output Ripple: 0.01 Line Regulation: +/- 1% Load Regulation: +/- 2% Cab Connector A: 1 x 10/100 RJ45 Cab Connector B: 1 x 10/100 RJ45 Operating Tempature: -40°C to +55°C POE Voltage: 48V Weight:275g Package Including 1X POE Power supply 1X Power cord(fit for your country)

Power Over Ethernet Kit Power over Ethernet Kit with Injector & Splitter This PoE kit lets you power your router through an Ethernet cable -- the AC adapter doesn't have to be near the router! This item works by carrying the current from your routers AC adapter over the Ethernet cable's wires that don't carry data to your router. These PoE kits have a range of roughly 50 meters for 12V routers and 15 meters for 5V routers. Greater distances can be achieved by using AC adapters with slightly higher DC voltage ratings. This item is compatible with practically all Linksys routers including the WRT54G series and many WRT54G WRT54GS WRT54GL WRTSL54GS WRT54GX WRT54GP2 WRTP54G WRT54GX2 WRT54GX4 WRT51AB WRT55AG WTR54GS WRT54G2 WRT54GC WRT54G3GV2 WRT54G-TM WRTU54G-TM

ING-ADE3af is a kind of adapter changing network connection into PoE network. There is no need to worry about power site when setting network machines on the ceiling or walls for the network cable changing with PoE. The basis of changing network connection into PoE network is IEEE802.3af. PoE power adapterMLN (middle level network) connection can change into PoE connection. Both communication and power get through a single LAN cable to supply power, so itâ?TMs unnecessary to worry about power when setting access point on the ceiling. It can supply power to IEEE802.3af (48v) devices. Connect network around power! This product can connect to corresponding PoE machines by a LAN cable while AC power connecting, and then connect to network. This product can change network connection into... Less

PowerDsine PD-3001/AC Midspan PoE Injector for Shoretel Phones PowerDsine's 3001/AC Midspan Power over Ethernet (PoE) Injector offers a compact and cost effective, fully IEEE 802.3af compliant solution for alternate powering of Shoretel IP Phones and other low port density products. Features: Small and compact design Fully compatible with IEEE 802.3af standard PoE with an integrated auto-sensing algorithm that provides safe power to remote terminals. Plug-and-play device. Once turned on, it automatically detects the Power over Ethernet terminal and supplies Power over Ethernet Equipped with two LEDs for indication of normal, overload or short-circuit conditions One Year Warranty

Remove clutter in your installations, replace up to 8 individual power over ethernet injectors with this single POE module. Full details and data sheet at http://beyond-wifi .com/poe/. Uses a 2.1mm x 5.5mm DC connector. We recommend 12v to 48v power supplies with 60 watts to power 8 x 6 watt access points, phones, cameras and so on.

Power over Ethernet Injector & Splitter Kit Works with both the newer Airvana Airave and older style Airave. This injector/splitter combo allows you to send power over the unused wires in a cat5 cable to power a device on the recieving end. This is great for applications where you need to install a wireless access point, but a power plug is unavailabe or very far away from where the wireless access point needs to be installed. Specs: - 12v devices will work up to 75 feet (some work over 100') - works with 5v, 12v, 24v, and 48v devices. Examples of compatible devices: NETGEAR: WNR854T WNR3300 WNR834B WNR1000 WNR2000 WNR3500L WGR614 FS116 GS108 GS116 LINKSYS CISCO: WRT54G WAP54G WET11 E1200 E1500 E2000 E2500