This kit contains an 8 port Power over Ethernet Injector plus 90 Watt power supply - you can select the voltage from 15 to 24 volts via a slide switch. Since standard ethernet needs only 2 of the 4 pairs in a CAT-5 cable, 2 pairs are unused. Passive POE uses pins 4/5 for plus power, and 7/8 for ground. Many popular devices this method to centralize the power source - you can go for 328 ft to a typical IP camera or Access Point. Reboot all 8 devices from one central location. We use these in our

The complete Passive Power over Ethernet SET contains two pieces - INJECTOR and SPLITTER. It is suitable for using with products that basically do not support Power Over Ethernet. Passive Power Over Ethernet SET is applicable for wide range of network products such as Access Points, Routers, IP cameras, modems, switches, embedded computers or other network devices. Passive Power over Ethernet SET is compatible with most devices available on the market such as D-Link, Linksys, Asus, Tp-link, Net

Remove clutter in your installations, replace up to 8 individual power over ethernet injectors with this single POE module. Full details and data sheet at http://beyond-wifi .com/poe/. Uses a 5.5mm x 2.5mm DC connector.

Get the updated guide to active and passive control systems for buildings.To capitalize on today's rapidly evolving, specialized technologies, architects, designers, builders, and contractors work together to plan the mechanical and electrical equipment that controls the indoor environment of a building. The Building Environment: Active and Passive Control Systems, Third Edition helps you take advantage of design innovations and construction strategies that maximize the comfort, safety, and energy efficiency of buildings.From active HVAC systems to passive methods, lighting to on-site power generation, this updated edition explains how to strategically plan for and incorporate effective, efficient systems in today's buildings. It covers the underlying thermal theories and thermodynamic... Less

Vivotek FD7132, aimed at providing 24-hour surveillance for indoor applications, features true day and night functionality with a removable IR-cut filter and IR illuminators. Boasting a 3-axis mechanism, the FD7132 can be flexibly installed in places such as banks, office buildings, and commercial complexes. In daylight, the IR-cut filter is activated to minimize the influence of infrared light on image color. Under low-light conditions, the IR-cut filter is removed automatically and the built-in IR illuminators are enabled to offer infrared light for up to 15 meters. As such, the FD7132 can provide high sensitivity and delivery of high image quality in both day and night conditions. In addition, the FD7132 can be easily installed on a ceiling or wall because of its sophisticated 3-axis... Less

Remove clutter in your installations, replace up to 8 individual power over ethernet injectors with this single POE module. Full details and data sheet at http://beyond-wifi .com/poe/. Uses a 2.1mm x 5.5mm DC connector. We recommend 12v to 48v power supplies with 60 watts to power 8 x 6 watt access points, phones, cameras and so on.

HyperLink Power-over-Etherne t (PoE) products provide remote power for access points, access servers, outdoor routers, and other suitable devices.

POE Splitters are used to take the power supplied from a POE power supply and split off the data and DC power into separate connectors. These splitters are mainly used for powering legacy devices which are not POE enabled but instead get their power from a DC connector. The POE Y Splitters are useful when two devices need remote power, one device being POE enabled to accept power thru the RJ45 and the other device requiring DC power thru a DC connector. The overall length of these devices is 10 inches. The RJ45 Jack is a high quality CAT5 rated jack for high speed data.The POE-SPLT-S accepts POE power from the CAT5 cable plugged into the RJ45 Jack and routes that DC power to the 5.5/2.1mm DC Plug. It uses shielded connectors and cable for the ultimate protection.Black Color Power supply... Less

PowerSense 20 Slot Modular PoE Hub, BL-8620 The PowerSense 20 slot modular chassis hub may be populated with any combination of PowerSense modules. The individual modules are all hot swappable and fully voltage isolated from each other. These units help reduce Total Cost of Ownership by allowing individual modules to be removed or inserted hot while the chassis and all other modules remain operational Mix and match modules for support of CDP devices, IEEE 48 volt, 24 volt or 12 volt applications within the same chassis. Power IP Phones, Wireless access points, Security cameras and other low voltage devices safely and efficiently with PowerSense. Features: Individual power modules, hot swappable in the 19" rackmount ready chassis, use 1 per powered device Each module is current... Less

Meridian MS10FT8GX2POE 8-port 10/100TX (PoE 15.4W) + 2-port 10/(100/1000 SFP)/RJ45 Combo ports

AIR802® has developed a passive Power-over-Etherne t (PoE) kit or set that allows low cost of delivering power over the network cable for shorter distances. This scheme allows power to be carried on 10/100 networks over the spare, unused pairs of a CAT5, CAT5E, or CAT6 Ethernet network cable. On shorter network lengths, the source power could be the power supply that came with the wireless access point, IP video surveillance camera, etc. This set contains a very cost effective injector and breakout or splitter component. The injector inserts the DC voltage at the source location into the 5.5mm x 2.1mm injector plug. The DC voltage is then carried over the spare pairs of the 10BASE-T or 100BASE-T network cable. The breakout or splitter extracts the DC voltage from the network cable onto... Less

HyperLink Power-over-Etherne t (PoE) products provide remote power for access points, access servers, outdoor routers, and other suitable devices.

The Enable-IT™ 865 Single-Line Ethernet Extender Kit is the world's only available solution to deliver Voice, Data and PoE in a combined package that exceeds the IEEE distance limitations for all Ethernet equipment and 802.3at PoE Plus. The 865 enables the simple installation of a PoE device up to 2,500ft (762m) From your LAN and Power Source. This is ideal for installing PoE IP Security cameras or PoE WiFi Access Points or for a standalone remote self powered LAN up to 3,500ft (1,067m).These extenders drive the reach of Ethernet to more than (10.7) ten times the typical Ethernet distance. 2,500ft/762m distance if using the PoE power to drive up to a 30v PoE device or 3,500ft/1,067m distance if using the PoE power standalone for the remote 865 CPE device only and LAN2 output for... Less