Power Supply, Overall Height 2-3/4 In., Overall Width 5 In., Overall Length 4 In., Sample Capacity 2 Gels, Material Aluminum, Black, Display Type Analog, Output Current 350ma, Output Watts 52-1/5, Output Voltage 15, 75, Or 150, For Use With Running Gel Samples

INTERNAL POWER SUPPLY 515R1

The 515PS1 Internal Rack Power Supply is designed to provide power to a full 517R1 Card Cage Rack. The unit provides a single 13.5 VDC output operating at 6 amps. The power supply accepts an AC input voltage from 100 to 240 VAC, 60/50 Hz. A second power supply can be installed in the 515R1 Rack to provide redundancy.Click Here to see more Products GE SECURITY 515PS1 N/A - Internal Redundant Power Supply for 515R1 from Ge Security FEATURES: 110 to 240 VAC, 60/50 Hz input 13.5 VDC output at 6 amps (Power Factor 48) Supplied with 515R1 Card Cage Rack Can be provided as redundant supply with automatic switchover Fiber fail and power fail alarms Front panel indicator and MUTE switch Dry contact or 14 VDC alarm output AC power cord supplied PDF Spec Sheet

60"L 8 Outlet Power Supply Includes 8 outlets, on/off switch, on indicator light, resettable circuit breaker, 6' cord. Mounts to electrical supply mounting rail which is fully adjustable on uprights or to worksurface. 15A, 125V

Power Supply, For Use With 2tb95 Flexible Current Probe, Four Port, External

The Power Supply uses a standard 115 VAC at 2.5 ampere input fuse rated @ 3.5 ampere, 250 volts. The power supply can control up to (3) Delayed Egress Exit Devices. Note: Adding additional loads to the PS160-6 Power Supply i.e., Card readers, Horns, etc...will reduce the quantity of Delay Egress Exit Devices that may be energized by the powersource. The filtered and regulated out put power is field selectable for 12 or 24 VDC at 6 amp. Fire alarm release that accepts normally closed contact Battery Backup with charger (27 VDC, 150mA) AC input is protected via a manually reset circuit breaker DC output is protected via an auto-reset fuse (PTC) LED indicators for AC input, DC output and Battery Backup status

Ideal for the home, shop and hobbyist.They can provide power for cellular phones,12V DC CB radios, scanners, HAM Radios, autosound systems and more.

The PS3020 is a 2.2 amp regulated power supply with a built-in battery charging circuit and AC power indicator. The board is 8.4cm/3.3" x 6.6cm/2.6" and comes with adhesive foam mounting tape.

72"L 8 Outlet Power Supply Includes 8 outlets, on/off switch, on indicator light, resettable circuit breaker, 6' cord. Mounts to electrical supply mounting rail which is fully adjustable on uprights or to worksurface. 15A, 125V

Power Supply to 13.5 DC w/ Connector - PS-110   Optional Battery Back-up Features & Benefits:   Compatible with the following time clocks: HP-1000 HP-1000E HP-2000 HP-3000 HP-4000

PS2 - Double Output power supply for latch pullback device Delivers the necessary in-rush current for two latch pullback exit devices Two independent inputs/outputs Solid-state design design eliminates problems associated with mechanical relays Thermal overload sensing reduces risk of failure due to overheating Fire Alarm disconnect link Inputs triggered by dry contact Intelligent short circuit detection detects shorts much faster than glass or resetable fuses and isolates the short to the individual output Removable Euro-style terminal blocks allow for easy installation

72"L 8 Outlet Power Supply Includes 8 outlets, on/off switch, on indicator light, resettable circuit breaker, 6' cord. Mounts to electrical supply mounting rail which is fully adjustable on uprights or to worksurface. 15A, 125V

SquareTrade AP6.0 Brand New In Box Pyramid 20 AMP POWER SUPPLY PS21KX Features: Perfect for Home, Shop and Hobbyist Input: 115V AC, 60Hz, 450 Watts Output: 13.8V DC 18 AMP Constant/20 AMP Surge Powers Cellular Phones,12V DC CB Radios, Scanners, HAM Radios, Autosound Systems, etc.Screw Terminal Connectors Crowbar Over-Voltage Protection Electronic Overload Protection w/Auto Reset Short Circuit Thermal Protection Fuse Protected LED Condition Indicators Built-in Cooling Fan Heavy Duty Cabinet Heat

This long-life Battery Pak and Charger now has infinitely high-low control. Pulse width modulation extends battery life up to 10 hours in low setting yet gives a full 2.5 hours on high. Can be used on a vehicle battery with an optional connector. Built-in charger allows you to fully recharge the battery in 12 hours. Purge the area on high for 10 minutes, reduce to low speed (low-noise as well) and maintain fresh air for the whole work shift. Ideal for construction job sites to eliminate noisy gasoline-engine blowers. High-low control enables fast-purge ventilation and lower speed for maintaining safe work space. High impact case includes battery and built-in charger for overnight charging. Up to 10 hours of continuous operation. Lightweight and portable. 17.00 L. 15.00 W. 11.00 H.