PROTECH Universal Blower Motor - 3/4 hp 120/1/60 (1075 rpm/3 speed) W51-34BAA3-01 Technical Data:HP: 3/4 No. of Speeds: 3 High Speed (RPM): 1075 Medium Speed (RPM): 950 Low Speed (RPM): 850 Input Voltage (V): 120 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 15/370 FLA at 120V (A): 9.80 LRA at 120V (A): 19.30 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.): 3-5/8 Overall Shaft Length (in.): 4-1/2 Motor Bod

This motor is the factory OEM replacement for many Rheem, Ruud, and Weatherking furnaces. This motor is a direct-drive motor and operates on 208/230 Volts AC. Mounts with through-bolts or band-around bracket. The shaft is 1/2" diameter X 5" long. The motor shell is 5-5/8" diameter (48 frame) and the motor body length is 4-5/8". The wire leads are 37" long with quick connect terminals. This motor is a Tripsaver motor and is designed to replace 1/6, 1/5, 1/4, 1/3, and 1/2 horsepower applications. IMPORTANT NOTE: For applications replacing 1/6, 1/5, 1/4, and 1/3 horsepower motors either a 5 MFD-370 VAC (Part #43-25134-02) or a 7.5 MFD-370 VAC (Part #43-25134-03) capacitor may be used. The motor will be approximately 10% stronger with the 7.5 MFD capacitor. For 1/2 horsepower applications,... Less

Direct-drive Blower Motor, Permanent Split Capacitor, Open Air-over, 3/4 Hp, Nameplate Rpm 1075, Voltage 115, Full Load Amps 11.5, 60 Hz, 48y Nema/iec Frame, Service Factor 1.0, Ambient 40 C, Insulation Class B, Number Of Speeds 4, Stud Mounting, Sleeve Bearings, Thermal Protection Auto, Rotation Cw/ccw, Body Dia 5 5/8 In, Length Less Shaft 5 3/4 In, Shaft Dia 1/2 In, Shaft Length 5 In, Capacitor Required 2mdv9, Oem Replacement For Rheem-ruud

PROTECH Blower Motor - 1/4 to 3/4 hp 120/1/60 (1075 rpm/4 speed) 51-23017-42 Technical Data: HP: 1/4 - 3/4 No. of Speeds: 4 High Speed (RPM): 1075 Input Voltage (V): 120 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 10/370, 12.5/370, or 15/370 FLA at 120V (A): 9.50 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.): 4 Overall Shaft Length (in.): 5 Motor Body Length (in.): 5-13/16 Overall Motor Length (in.): 10-13/16 Mounting: Shell-band Mounting: Shell-screw Frame Size: 48 Bearing Type: Ball Application: Blower Drive Type: Direct Drive Replacement History: 51-22687-01 51-24043-01 51-23017-41 51-21459-02 51-24146-01 51-19055-01 51-26192-01 51-22121-01 51-18716-11 51-20825-01 51-18716-01 51-20815-01... Less

This is a BRAND NEW OEM Rheem/Weather King/Corsaire/RUU D 3-Speed Protech Blower Motor. It is designed by Rheem/Ruud to replace many older motors. The Hose Power range is 3/4-1/3 depending on how you wire it. The Rheem/Weather King/Corsaire/RUU D part number is 51-23017-31 (OEM Replacement for many older part numbers) and the Emerson Model is K55HXEGR-7316. This motor is 5 5/8" in diameter (Frame 48Y) and has a wiring diagram on the side of the motor. The rotation is reversible and the shaft exte

This is a BRAND NEW OEM Rheem/Weather King/Corsaire/RUU D 3 Speed Protech Blower Motor. It is designed by Rheem/Ruud to replace many older motors. The Hose Power range is 1/2-1/4 depending on how you wire it. The Rheem/Weather King/Corsaire/RUU D part number is 51-23012-31 (OEM Replacement for many older part numbers) This motor is 5 5/8" in diameter (Frame 48Y) and has a wiring diagram on the side of the motor. The rotation is reversible and the shaft extends out of the motor 5".The motor you ar

This is a BRAND NEW Rheem/Weather King/Corsaire/RUU D 2 Speed Motor. It's 1/4 HP, 208-230 volts, 1100 RPM. The Rheem/Weather King/Corsaire/RUU D part number is 51-102500-08 (also 51-1021773-03)and the Emerson # is K55HXLRK-0210. It takes a 12.5 uf Capacitor rated at 370 volts. This motor is 5 5/8" in diameter (Frame 48Y) and has a wiring diagram on the label. Visit our eBay Store: NorthAmericaHVAC Partial List of Rheem/Ruud/Weathe r King/Corsaire Units that use this Motor: RHSA RHSL AHSA AHSL RHAL

This is a BRAND NEW GE Rheem/Weather King/Corsaire/RUU D Air Conditioning Fan Motor. It's 1/3 HP, 208-230 volts,1050 RPM. The Rheem/Weather King/Corsaire/RUU D part number is 51-100998-29 and the GE part # is 5KCP39PGU768S. It takes a 10 uf Capacitor rated at 370 volts. If the shaft is facing up, as seen in the picture, rotation is clockwise. Thanks for looking and good luck! Visit our eBay Store: NorthAmericaHVAC Please e-mail us with any questions you may have, or if you need a price on another

This motor is the factory OEM replacement for many Rheem, Ruud, and Weatherking furnaces. This motor is a direct-drive motor and operates on 115/120 Volts AC. Mounts with screws in the motor shell, through-bolts, or band-around bracket. The shaft is 1/2" diameter X 5" long. The motor shell is 5-5/8" diameter (48 frame) and the motor body length is 4-11/16". The wire leads are 37" long with quick connect terminals. This motor is a Tripsaver motor and is designed to replace 1/6, 1/5, 1/4, 1/3, and 1/2 horsepower applications. IMPORTANT NOTE: For applications replacing 1/6, 1/5, 1/4, and 1/3 horsepower motors either a 5 MFD-370 VAC (Part #43-25134-02) or a 7.5 MFD-370 VAC (Part #43-25134-03) capacitor may be used. The motor will be approximately 10% stronger with the 7.5 MFD capacitor. For... Less

Blower Motor - 1/2 hp 120/1/60 (1075 rpm/3 speeds) 51-24272-01 Technical Data:HP: 1/2 No. of Speeds: 3 High Speed (RPM): 1075 Input Voltage (V): 120 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): CCW Run Capacitor (uF/V): 15/370 FLA at 120V (A): 7.90 LRA at 120V (A): 15.00 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.): 3 Overall Shaft Length (in.): 3-3/4 Motor Body Length (in.): 5-1/4 Overall Motor Length (in.): 9-1/16 Mounting: Shell-ba

Blower Motor - 3/4 hp 120/1/60 (1705 rpm/3 speeds) 51-25327-01 Technical Data: HP: 3/4 No. of Speeds: 3 High Speed (RPM): 1075 Input Voltage (V): 120 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): CCW Run Capacitor (uF/V): 15/370 FLA at 120V (A): 9.50 LRA at 120V (A): 23.00 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.): 3-1/16 Overall Shaft Length (in.): 3-3/4 Motor Body Length (in.): 5-13/16 Overall Motor Length (in.): 9-9/16 Mounting: Shell-band Mounting: Shell-screw

Blower Motor - 1/2 hp 120/1/60 (1075 rpm/4 speeds) 51-24070-02 Technical Data: HP: 1/2 No. of Speeds: 4 High Speed (RPM): 1075 Input Voltage (V): 120 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): CCW Run Capacitor (uF/V): 7.5/370 FLA at 120V (A): 7.10 LRA at 120V (A): 12.40 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.): 3 Overall Shaft Length (in.): 3-1/2 Motor Body Length (in.): 4-3/4 Overall Motor Length (in.): 8-5/16 Mounting: Shell-band Mounting: Shell-screw

Blower Motor - 1/2 hp 120/1/60 (1075 rpm/4 speeds) 51-102500-01 Technical Data:HP: 1/2 No. of Speeds: 4 High Speed (RPM): 1075 Input Voltage (V): 120 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): CCW Run Capacitor (uF/V): 7.5/370 FLA at 120V (A): 6.30 LRA at 120V (A): 12.00 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.): 3 Overall Shaft Length (in.): 3-1/2 Motor Body Length (in.): 4-13/16 Overall Motor Length (in.): 8-5/16 Mounting: Shel

Blower Motor - 1/4 hp 120/1/60 (825 rpm/2 speeds) 51-21628-01 Technical Data: HP: 1/4 No. of Speeds: 2 High Speed (RPM): 825 Input Voltage (V): 120 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): CCW Run Capacitor (uF/V): 10/370 FLA at 120V (A): 4.50 LRA at 120V (A): 8.80 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.): 3-1/2 Overall Shaft Length (in.): 4-7/16 Motor Body Length (in.): 4-13/16 Overall Motor Length (in.): 9 Mounting: Shell-band

This is a BRAND NEW Rheem/Weather King/Corsaire/RUU D 2 Speed Motor. It's 1/4 HP, 208-230 volts, 1100 RPM. The Rheem/Weather King/Corsaire/RUU D part number is 51-102500-08 (also 51-1021773-03) and the Emerson # is K55HXLRK-0210. It takes a 12.5 uf Capacitor rated at 370 volts. This motor is 5 5/8" in diameter (Frame 48Y) and has a wiring diagram on the label.

This is a BRAND NEW OEM Rheem/Weather King/Corsaire/RUU D Single Speed Protech Blower Motor.The Rheem/Ruud Part # is 51-23054-12. The GE Genteq model is 5KSP39HGW442S. It's 1/4 HP, 230 volt, 1050 rpm.If the shaft is facing up, rotation is clockwise.Thanks for looking and good luck! Visit our eBay Store: NorthAmericaHVAC Partial List of Rheem/Ruud/Weathe r King/Corsiare Units that use this Blower Motor: Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage yo

Item listing is for one new, ~Rheem / Ruud / Protech Furnace Blower Motor Part# 51-23017-42 Volt - 115 Horse Power - 1/4 - 3/4 Amps - 9.5 Shaft - 1/2" x 5" HZ - 60 RPM - 1075 Phase - 1 Speeds - 4 Rheem/Weather King/Corsaire/RUU D 4 Speed Protech Blower Motor.The Rheem/Weather King/Corsaire/RUU D part number is 51-23017-42. This motor is 5 5/8" in diameter (Frame 48Y) and has a wiring diagram on the side of the motor.Reversable rotation. Check out my other items ! M-W

This is a BRAND NEW Rheem/Weather King/Corsaire/RUU D 2 Speed Motor. It's 1/4 HP, 208-230 volts, 1100 RPM. The Rheem/Weather King/Corsaire/RUU D part number is 51-102500-08 (also 51-1021773-03) and the Emerson # is K55HXLRK-0210. It takes a 12.5 uf Capacitor rated at 370 volts. This motor is 5 5/8" in diameter (Frame 48Y) and has a wiring diagram on the label.

This is a BRAND NEW OEM Rheem/Weather King/Corsaire/RUU D 3 Speed Protech Blower Motor. It is designed by Rheem/Ruud to replace many older motors. The Hose Power range is 1/2-1/4 depending on how you wire it. The Rheem/Weather King/Corsaire/RUU D part number is 51-23012-31 (OEM Replacement for many older part numbers) This motor is 5 5/8" in diameter (Frame 48Y) and has a wiring diagram on the side of the motor. The rotation is reversible and the shaft extends out of the motor 5". OEM Replacement for Old Part #s: 51-19218-01 51-18838-01 The motor you are purchasing is brand new. When installing a new motor the motor manufactures highly recommend that you install a new capacitor at the same time. Old capacitors can become weak over time and have a negative effect on the new motor.

Blower Motor - 3 hp 208-230-380-415-46 0/3/50-60 (1725 rpm/1 speed) 51-42537-01 Technical Data: HP: 3 No. of Speeds: 1 High Speed (RPM): 1725 Input Voltage (V): 208 Input Voltage (V): 220 Input Voltage (V): 230 Input Voltage (V): 380-415 Input Voltage (V): 460 No. of Phases: 3 Frequency (Hz): 50 Frequency (Hz): 60 Rotation Direction (OSE): Reversible FLA at 230V (A): 9.20 LRA at 230V (A): 74.50 FLA at 460V (A): 4.60 LRA at 460V (A): 38.10 Shaft Diameter (in.): 7/8 Motor Body Diameter (in.): 6-1/2 Keyed/Flat Shaft Length (in.): 1-3/4 Overall Shaft Length (in.): 2-1/4 Motor Body Length (in.): 11-1/16 Overall Motor Length (in.): 13-5/16 Mounting: Platform Frame Size: 56HZ Bearing Type: Ball Application: Blower Drive Type: Belt Drive Replacement History: 51-42371-02 51-42371-01 51-42178-86... Less

Blower Motor - 1/4 hp 208-230/1/50-60 (825 rpm/2 speeds) 51-23102-06 Technical Data: HP: 1/4 No. of Speeds: 2 High Speed (RPM): 825 Input Voltage (V): 208 Input Voltage (V): 220 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 50 Frequency (Hz): 60 Rotation Direction (OSE): CCW Run Capacitor (uF/V): 7.5/370 FLA at 230V (A): 2.00 LRA at 230V (A): 2.90 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.): 1-1/2 Overall Shaft Length (in.): 3-5/16 Motor Body Length (in.): 4-1/2 Overall Motor Length (in.): 7-3/4 Mounting: Shell-band Mounting: Shell-screw Frame Size: 48

This is a BRAND NEW OEM Rheem/Weather King/Corsaire/RUU D 3 Speed Protech Blower Motor. It is designed by Rheem/Ruud to replace many older motors. The Hose Power range is 1/2-1/4 depending on how you wire it. The Rheem/Weather King/Corsaire/RUU D part number is 51-23012-31 (OEM Replacement for many older part numbers) This motor is 5 5/8" in diameter (Frame 48Y) and has a wiring diagram on the side of the motor. The rotation is reversible and the shaft extends out of the motor 5". OEM Replacement for Old Part #s: 20054901 8101-5637 8101-5507 The motor you are purchasing is brand new. When installing a new motor the motor manufactures highly recommend that you install a new capacitor at the same time.

Blower Motor - 1B hp 460/1/60 (1075 rpm/2 speeds) 51-19708-01 Technical Data: HP: 1 No. of Speeds: 2 High Speed (RPM): 1725 Input Voltage (V): 460 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): CCW Run Capacitor (uF/V): 12.5/370 FLA at 460V (A): 3.20 LRA at 460V (A): 10.30 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.): 2 Overall Shaft Length (in.): 2-1/2 Motor Body Length (in.): 8 Overall Motor Length (in.): 10-1/2 Mounting: Shell-band Frame Size: 48Y Bearing Type: Sleeve

Blower Motor - 1 hp 120-208-230/1/60 (3450 rpm/1 speed) 51-40638-01 Technical Data:HP: 1 No. of Speeds: 1 High Speed (RPM): 3450 Input Voltage (V): 120 Input Voltage (V): 208 Input Voltage (V): 230 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): CW Run Capacitor (uF/V): N/A FLA at 120V (A): 11.60 FLA at 208V (A): 5.80 FLA at 230V (A): 5.80 Shaft Diameter (in.): 5/8 Motor Body Diameter (in.): 5-1/2 Keyed/Flat Shaft Length (in.): 1-1/4 Overall Shaft Length (in.): 1-7/8 Motor Body Le

This is a BRAND NEW GE Rheem/Weather King/Corsaire/RUU D Air Conditioning Fan Motor. It's 1/3 HP, 460 volts,825 RPM. The Rheem/Weather King/Corsaire/RUU D part number is 51-100998-26 and the GE part # is 5KCP39JFAC42S. It takes a 5 uf Capacitor rated at 370 volts. Visit our eBay Store: NorthAmericaHVAC Please e-mail us with any questions you may have, or if you need a price on another HVAC part! Thanks! RRNA-B RRNL-B RRPL-B SSNJ SSNM Powered by eBay Turbo Lister The free listing tool. List your i

This is a BRAND NEW OEM Rheem/Weather King/Corsaire/RUU D 3 Speed Protech Blower Motor. It is designed by Rheem/Ruud to replace many older motors. The Hose Power range is 1/2-1/4 depending on how you wire it. The Rheem/Weather King/Corsaire/RUU D part number is 51-23012-31 (OEM Replacement for many older part numbers) This motor is 5 5/8" in diameter (Frame 48Y) and has a wiring diagram on the side of the motor. The rotation is reversible and the shaft extends out of the motor 5". OEM Replacement for Old Part #s: 51-18828-11 8101-5593 8101-5545 The motor you are purchasing is brand new. When installing a new motor the motor manufactures highly recommend that you install a new capacitor at the same time. Old capacitors can become weak over time and have a negative effect on the new motor.

Rheem Ruud 51-23102-06 230V Blower Motor 2 Speed NEW Rheem Ruud 51-23102-06 Condenser Fan Motor HP: 1/4 RPM: 825 Voltage: 208-230 V Amps: 2.0 Number of Speeds 2 Sleeve Bearings: YES Rotation: CCWLE 60/50 Hz Capacitor Required: YES * The 7.5 x 370 mfd Run Capacitor is sold separately. Replaces Part Numbers: 51-23103-06, 51-21543-01 Used in: RBHA-17J15-SUAA, UBHA-17J15-SUAA, WBHA-17J15-SUAA Climate Doctors offers products that may require professional installation. Climate Doctors recommends hiri

PROTECH Universal Blower Motor - 1/3 hp 120/1/60 (1075 rpm/3 speed) W51-13BAA3-01 Technical Data:HP: 1/3 No. of Speeds: 3 High Speed (RPM): 1075 Medium Speed (RPM): 950 Low Speed (RPM): 850 Input Voltage (V): 120 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 5/370 FLA at 120V (A): 6.10 LRA at 120V (A): 11.20 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.): 3-5/8 Overall Shaft Length (in.): 4-1/2 Motor Body

PROTECH Universal Blower Motor - 1/4 hp 120/1/60 (1075 rpm/3 speed) W51-14BAA3-01 Technical Data: HP: 1/4 No. of Speeds: 3 High Speed (RPM): 1075 Medium Speed (RPM): 950 Low Speed (RPM): 850 Input Voltage (V): 120 No. of Phases: 1 Frequency (Hz): 60 Rotation Direction (OSE): Reversible Run Capacitor (uF/V): 5/370 FLA at 120V (A): 4.20 LRA at 120V (A): 7.20 Shaft Diameter (in.): 1/2 Motor Body Diameter (in.): 5-5/8 Keyed/Flat Shaft Length (in.): 3-1/2 Overall Shaft Length (in.): 4-1/2 Motor Body Length (in.): 4-1/5 Overall Motor Length (in.): 8-11/16 Mounting: Shell-band Mounting: Thru-bolt