Overview The JM20330 is a single chip solution for serial and parallel ATA translation. It includes the Serial ATA PHY, Link, Transport, and Parallel ATA (application layer) controller. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 JM20330 supports a 1.5GHz data rate, and scalable to 3.0 GHz data rate by directly doubling the internal clock source. The application layer supports both the ATA register command set and PACKET command set, which could drive both Hard Disk Drive and ATAPI Optical Storage such as CR-ROM, CD-RW, DVD-ROM, DVD-RW, etc. The Serial ATA and the Parallel ATA application layer support both host and device operation and can be configured through a single pin. Feature Compliance Serial ATA 1.0 Specification compliant Overall ... Less

SIIG's SuperSpeed USB 3.0 to SATA/IDE Adapter is designed to easily add more storage space to your USB enabled (USB 3.0 recommended) notebook or desktop computer. It installs in minutes with quick and easy tool-less design and driver-free installation, simply connect a 2.5" or 3.5" Serial ATA (SATA) or IDE hard disk drive to this adapter then connect to a USB port. This SATA/IDE adapter delivers USB 3.0 data transfer rates up to 5Gb/s, supports USB Mass Storage Class Bulk-Only Transport, and is compatible with wide variety SATA and IDE hard disk drives of any brand and capacity. It is the perfect solution enabling you to easily add more storage space to your notebook and desktop computer.The SuperSpeed USB 3.0 to SATA/IDE Adapter is compliant with USB 3.0 Specification, is FCC and CE... Less

Lindy IDE Converter for SATA Drives Plugs directly into a SATA drive 40 Way IDC Male (controller) to Serial ATA (drive) Power adapter cable included Supports SATA Generation 1 and 2 devices at speeds of 1.5 and 3GBps Fully compliant with SATA II 1.0 specification Supports HDD larger than 137GB Bridge converter supports PC, Mac and Linux Compatible with Ultra ATA 133/100/66/33 Plug & Play installation, no software required Dimensions: 75 x 26mm

Brand New IDE to SATA or SATA to IDE Bidirectional Adapter FEATURES: Converts Serial ATA to Parallel ATA Converts Parallel ATA to Serial ATA Supports ATA 100/133 Compliant with Serial ATA Specification (1) 40 pin IDE Port (1) Serial ATA Port (1) 4 Pin Power Connector

Cables Unlimited USB 2.0 to IDE & SATA Adapter Cable with Power Turn any SATA or IDE drive into a convenient external drive with our USB 2.0 to IDE drive adapter. Simply connect an IDE drive, plug the USB to IDE adapter into an available USB port to transfer files from computers or notebooks, back up files, or store files on hard drives with ease. Supports Iomega Zip, CD-ROM, CD-RW, DVD-ROM and hard drives. Transfer files quickly and easily. Support SATA spread-spectrum transmitter Compliance with USB 2.0 (Hi-Speed) specification Support ATA/ATAPI LBA48 bit addressing mode Support dual LUN (Logic Unit Number) with automatic master/slave enumeration High-Speed Data Transfer, Low Power Consumption Small enough for travel Operating System Support: Desktop and Laptop computers with... Less

This cable converts 2 internal SATA port on motherboard to the back PCI bracket of computer system to an eSATA connector (Support IDE Power) Specifications: Connectors: 2 x eSATA female, 2 x SATA male Cable: SATA cable  Length: 35cm Header Connection Guides Simply plug the SATA male connector into the SATA female connector on the motherboard. Note that the orientation of the connection is guided by the tongue and groove mechanism on the two connectors.

The Image MASSter 4000PRO Open Tray is the next generation, fast and reliable, IT Duplicator based on the time proven ImageMASSter 4000IDE Series. The Image MASSter 4000PRO Open Tray comes as the perfect solution for the mid-size IT organization looking for all the benefits of an enterprise level hard drive duplicator in a compact and easy to use solution. This versatile unit supports the high speed duplication of up to eight (8) 2.5" and 3.5" SAS, SATA, IDE*, USB and e-SATA drives. Through the the use of an efficient, cable-free drive caddy system, users can change drives quickly minimizing the total time necessary for drive duplication or wiping processes. The unit operates at a top speed capability of 18GB/minute which easily handles the fastest drives available today and also allows... Less

Providing Excellent Service Since 1989 STARTECH.COM ide to SATA drive mounted adapter New-Retail Description: The perfect solution for adding SATA drives to motherboards lacking available SATA connectivity, while preserving space within the computer. Also ideal for use with older motherboards that do not provide SATA data or power connectors. IDE2SAT is a pure hardware solution and requires no drivers or software and is easy to install. Features: 48 bit addressing supports larger capacity drives

Providing Excellent Service Since 1989 STARTECH.COM ide to SATA drive mounted adapter New-Retail Description: The perfect solution for adding SATA drives to motherboards lacking available SATA connectivity, while preserving space within the computer. Also ideal for use with older motherboards that do not provide SATA data or power connectors. IDE2SAT is a pure hardware solution and requires no drivers or software and is easy to install. Features: 48 bit addressing supports larger capacity drives

Type: IDE to SATASpecification s: Connects up to two (2) SATA hard drives or optical drives into an IDE controller and eliminates the incompatibility between IDE and SATA devices in one easy step Uses dual Marvell bridge chipsets for best performance & compatibility Supports all SATA-I SATA-II and SATA-III devices; 2.5' 3.5' & 5.25' HDDs SSDs or ODDs Easily fits in any available IDE (ATA 40-pin) connector in cable free configuration (*no IDE cable required) Supports PIO Mode 0-4 Supports ATA Host Bridge Supports Serial ATA Power Save mode Plug-N-Play and Hot-swapping capability Operating System Requirements: 32-bit & 64-bit Windows 98SE/ME/2000/Serv er 2003/XP/Server 2003/Vista/Server 2008/Windows 7 Linux Mac OS X 10.2.x or abovePackage Contents: One (1) IDE to Dual SATA... Less

NEW Startech.com IDE2SAT25 IDE 40 pin Female/SATA Adapter number: IDE2SAT25, UPC: 065030832779) Manufacturer: StarTech.com Manufacturer Part Number: IDE2SAT25 Brand Name: StarTech.com Product Model: IDE2SAT25 Product Name: 40 Pin Female IDE to SATA Adapter Converter This IDE to SATA adapter converts a 40-pin IDE connector to a SATA connector, allowing you to connect a 2.5in or 3.5in SATA (SATA, SATA II/SATA 300) drive to the motherboard in place of an IDE drive. The IDE to SATA Adapter is suitable for installation in any computer case, as it is requires minimal space and does not impact airflow. Product Type: Data Transfer Adapter Technical Information Connector on First End: 1 x 40-pin IDC Female Connector on First End: 1 x SP4 Male Connector on Second End: 1 x 7-pin Male SATA Physical... Less

Image MASSter 4004 SATA/IDE high speed hard drive duplicator contains multiple hard drive copy modes that support the copy of standard Windows Operating Systems and drive copy of non-Windows Operating Systems. With the Image MASSter 4004 SATA/IDE drive duplicator partitions are automatically scaled and formatted during the data copy process, eliminating the need to manually prepare a drive prior to the copy process. The Image MASSter 4004 SATA/IDE hard drive duplicato unit comes with equipped with the WipeOut option. This option allows you to quickly and accurately erase data from hard drives in adddition to the duplication and drive copy process. Unit ships with 5 SATA and 5 IDE data and power cables.

IDE Controller to SATA Adapter - Use a SATA Drive on a IDE Controller! Use your IDE Controller to connect a SATA device! Featuring the Jmicron 20330 chipset, this device allows you to connect a SATA device to an IDE controller on your motherboard. It's compliant with ATA/ATAPI UDMA transfer up to UDMA 133 and supports SATA/150 drives. A jumper switch allows you to set this to master or slave depending on your needs. You can connect a SATA drive to any motherboard! This adapter is ideal for legacy boards but can also come in handy with newer motherboards. Buy a second adapter and you can set your SATA devices as master and slave on one IDE controller! General Features: Uses an IDE controller to connect SATA devices Jmicro 20330 chipset Serial ATA 1.0a specification compliant Supports... Less

Features One touch backup function Faceplate made of aluminum alloy good for heat dissipation Convert 2.5"/3.5" Serial ATA HDD and 5.25" Serial ATA Devices into USB2.0 interface Convert 2.5"/3.5" IDE HDD and 5.25" IDE Devices into USB2.0 interface Max tranfer speed 480Mb/s Power adapter for 3.5"/5.25" devices Bus-Power for 2.5" HDD Specifications Model No.: FUBCA Interface: USB2.0 Data transfer rate: USB2.0:480Mb /s Suitability: 2.5", 3.5" , 5.25" IDE/SATA Devices Hot Plug: Supports Plug-play and Hot-plug Power: Adapter (AC 100~240V, 50~60Hz ; DC 5V/12V) Material: Aluminum + Plastic OS Compatibility: Windows 98se/Me/2000/XP/V ista; MAC Dimension: 84 x 64 x 21 mm (L x W xH)