Hazardous Location Warning Light, Color Red, Lamp Type Led, Flashes Per Minute 60 Or Steady Burn, Light Output 70.8 Candela, Lamp Life 60,000 Hr., Lens Design Fresnel, Lens Material Tempered Glass, Housing Material Copper Free Aluminum, Mounting (f) 3/4 In. Npt, Operating Temp. -58 To 150 Degrees F, Rating Ip66, Nema 4x, Marine, Power Source 24vac/dc, Current Drawn 0.38a Ac/dc, Height 9-1/4 In., Diameter 5-1/2 In., Standards Ul, Includes Dome Guard

The Dormer C191 gold oxide-finished cobalt steel square end mill has a threaded shank, two flutes, and a 30-degree helix angle for general-purpose machining on a range of materials. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The gold oxide finish is a low-temperature heat treatment that reduces grinding stress within the tool. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering resistance to heat and abrasion. The tool’s square end creates sharp, unrounded cuts. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong... Less

The Dormer C191 gold oxide-finished cobalt steel square end mill has a threaded shank, two flutes, and a 30-degree helix angle for general-purpose machining on a range of materials. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The gold oxide finish is a low-temperature heat treatment that reduces grinding stress within the tool. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering resistance to heat and abrasion. The tool’s square end creates sharp, unrounded cuts. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong... Less

WL2403NF30 Piston, Forged, Dish, 4.030 in. Bore, 5/64 in., 5/64 in., 3/16 in. Grooves, Avanti, Checker, Chevy, GMC, 5.7L Please hover mouse to enlarge image Speed-Pro Forged Piston WL2403NF30 Bore (in) 4.030 in. Bore (mm) 102.362mm Compression Distance (in) 1.562 in. Notes Recessed piston head design is 0.068 inch deep. Individual replacement piston. Pin Diameter (in) 0.927 in. Piston Material Forged aluminum Piston Ring Thickness 5/64 in. x 5/64 in. x 3/16 in. Piston Style Dish, with four valv

Control Station, Nema Type 1, Nameplate Forward/reverse/s top, Number Of Buttons 3, Operator Momentary, Mechanical Interlock No, Contact Form 2 No/nc And 1 Nc, Surface Mount

Capacitor Start Totally Enclosed Fan Cooled Motor, Hp 1/4, Rpm 1725, Voltage 115/20-230 V, Nema Frame 48, Service Factor 1.00, Frequency 60 Hz, Mounting Rigid, Bearings Double Shielded Ball, Thermal Protection Auto, Full Load Amps 4.5/2.2-2.2

The Mitutoyo 573-191-10 ABSOLUTE low force digital caliper uses low measuring force to measure pliable materials such as plastics and rubbers. This caliper has accessible function control buttons, such as Origin-set, Zero-setting, Power On/Off, and Data Output, and uses the metric measuring system. Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper’s LCD increases reading reliability. The 573-191-10 has the ABSOLUTE electrostatic capacitance linear encoder. It weighs 253 g. Main scale length is 314 mm, jaw depth is 40 mm, and beam width is 16 mm. Range is 0 - 180 mm, resolution is 0.01 mm, and accuracy is rated at + or - 0.05 mm. Measuring force is 0.49N to 0.98N. Also included are origin-setting, zero-setting, data output,... Less

@0 - 4 WC HANDHELD MONOMETER"

2 PACK AVANTI PRO 7-1/4 24 TOOTH FRAMING CIRCULAR SAW BLADE New 2 blades Thin Kerf Design Guaranteed

Adjustable jacobs style chuck can accommodate accessory shafts from 1/16" to 3/8" diameter Includes chuck key

Corner Guard, Overall Length 2 In., Overall Height 48 In., Wall Thickness 1/16 In., Beige, Molded Plastic With Aluminum Insert, Includes 90 Degree Angle

Motor Starter, Nema, Non Reversing, Nema Size 3, Nema Enclosure Type 1, Coil Volts 220-240vac, 60 Hz, Number Of Poles 3, 90 Amps Ac, Aux. Contact Configuration 1no, 25 Hp @ 3 Phase - 208v, 30 Hp @ 3 Phase - 230v, 50 Hp @ 3 Phase - 460v, 50 Hp @ 3 Phase - 575v, Height (in.) 19.13, Width (in.) 11.38, Depth (in.) 7.69, Standards Ul/csa

Console Enclosure, Nema Enclosure Type 12 And 13, 14 Gauge Carbon Steel, Length 8 In, Width 16 In, Depth 7.09 In, Finish Ansi 61 Gray Polyester Powder, Lid Hinge Continuous Pin, Oil Resistant Neoprene Gasket, Series 30 Or 60 Degree, Designed To House Electrical Controls And Instruments To Provide Protection From Dirt, Dust, Oil And Water

Console Enclosure, Nema Enclosure Type 12 And 13, 14 Gauge Carbon Steel, Length 8 In, Width 12 In, Depth 7.09 In, Finish Ansi 61 Gray Polyester Powder, Lid Hinge Continuous Pin, Oil Resistant Neoprene Gasket, Series 30 Or 60 Degree, Designed To House Electrical Controls And Instruments To Provide Protection From Dirt, Dust, Oil And Water

Shop for Power Tool Accessories at The Home Depot. The Avanti Pro 6-1/2 in. x 18 Tooth Fast-Framing Circular Saw Blade has wide-set teeth designed for cutting softwood, pressure-treated beams and oriented-strand board (OSB). The durable- construction carbide reinforcement extends the life of this blade up to twice that of standard steel blades. It has a thin-kerf edge and friction- reducing rim coating to resist binding and drag. It is designed specifically for professional contractors.

Shop for Power Tool Accessories at The Home Depot. The Avanti 3-3/8 in. x 24 Tooth Finish Circular Saw Blade is ideal for wood and oriented-strand board (OSB). The high-quality steel is manufactured with carbide and lasts up to 30 times longer than regular steel blades. It is durable, economical and can be sharpened when needed.

Console Enclosure, Nema Enclosure Type 12 And 13, 14 Gauge Carbon Steel, Length 16 In, Width 20 In, Depth 11.09 In, Finish Ansi 61 Gray Polyester Powder, Lid Hinge Continuous Pin, Oil Resistant Neoprene Gasket, Series 30 Or 60 Degree, Designed To House Electrical Controls And Instruments To Provide Protection From Dirt, Dust, Oil And Water

THS series transmitters are compatible with Reotemp DM series digital indicators. Each Reotemp transmitter is inspected and calibrated prior to shipment, to ensure it is 100 percent Ready-to-Go right out of the box. Output signal: 4-20mA, (2 wire) (Std). Pressure ranges: vacuum, compound, pressure 0/2 to 0/1000 PSI gauge and absolute. Ranges 60psi and below not recommended with 3/4" tri-clamp. Accuracy: +/- 0.5 percent. Process connection: 1.5" triclamp. Electrical connection: mini Hirschman (no cable). Fill fluid: glycerin (std). Made in the USA.

Shop for Power Tool Accessories at The Home Depot. Avanti PRO Removal Project Set provides all the brushes and wheels necessary to remove rust and paint from metal and other materials. Included in this project set is (1) 3 in. Crimped Wire Wheel, (1) ï¿ in. End Brush, (1) 3 in. Flap Wheel and (1) 2 in. Wire Cup Brush. The items in this set are for use in hand drills and are ideal for wood and metal materials.

Tubing, Extruded, Inside Dia. 0.250 In., Outside Dia. 0.375 In., Wall Thickness 0.063 In., Max. Pressure (psi) 150, Burst Pressure (psi) 600, Vacuum Rating (inches Hg) 28, Tolerance +0.004 To0.004 In., Material Of Construction Polyurethane, Length 250 Ft., Hardness Shore A: 98, Color Green, Standards Nsf